VistApedia - User contributions [en]

Vitals / Measurements

2007-03-08T22:20:30Z

JWilson: added last screen shot and fixed img order

=Installing the Vitals module=

'''***You should have VistA installed and it should be running *****'''

1. Go to:

ftp://ftp.va.gov/VistA/Software/Packages/Gen%20Med%20Rec%20-%20Vitals%20-%20GMRV

2. Install VITL5_0_1.EXE by double clicking on the file name and you will get a pop-up window

3. Click "Run" and when the files finish loading the Vitals Wizard will open

4. Click "Next" and Vitals Wizard will begin the install.

5. Click Next two more times and the files will begin to copy over

6. After the files are copied click "Next" and you will get a screen for Set UP Status

7. Click "Finish" and the Vitals icon should appear on your desktop.

8. Go back to ftp://ftp.va.gov/VistA/Software/Packages/Gen%20Med%20Rec%20-%20Vitals%20-%20GMRV and install VITL5_P18.EXE by double clicking on the file name

9. Click Run and when the files finish loading click "Next"

10. Click "Finish" and the Vital Manager icon should appear on your desktop.

11. Right click on the [[Image:VitalsMicon.JPG]] icon on your desktop and click Properties and the following windows will open:

[[Image:VitalsMproperties.JPG]]

12. Type a space at the end of the "Target" and enter your server IP and Port number into to the end of the target field. (This information can be Copy and Pasted from your CPRS shortcut)
- It should look something as follows:

[[Image:VitalsMproperties2.JPG]]

13. Click "Apply" and click "OK"

14. Repeat steps # 11 - 13 for [[Image:VitalMmgrIcon.JPG]]

15. Open up the Vitals Manager by double cliking on the icon and the login screen will open. Enter the same access and verify code that you use for logging into CPRS and you will then see the following screen:

[[Image:VitalsMopened.JPG]]

16. Click on the '''+''' sign under “Templates” and click on the “System” folder.

17. On the top menu click on "Templates" and then "New Template" from the drop down menu, as seen below:

[[Image:VitalsMtemplate.JPG]]

- The following screen will open:

[[Image:VitalsMnameT.JPG]]

18. Enter the Template Name. (i.e. All) and click "OK"

19. Click on the '''+''' cursor found on the left side of the "Vitals Template Editor" screen.

[[Image:VitalsMtemplate2.JPG]]

20. Choose which Vital signs that you want displayed for the template.
*Hint: If you want all of these select the top one and then while holding down the “Shift” key select the last item.

[[Image:VitalsMlist.JPG]]

- Click "OK"

21. Click "Templates" found at the top of the screen then click "Save Template" from the drop down menu bar.

[[Image:VitalsMsave.JPG]]

22. Now the “Vitals” screen should now be working from within the VOE CPRS application.

[[Image:VitalsMend.JPG]]

File:VitalsMnameT.JPG

2007-03-08T22:12:14Z

JWilson: name new template

name new template

Vitals / Measurements

2007-03-08T22:11:05Z

JWilson: more edits and more screen shots

=Installing the Vitals module=

'''***You should have VistA installed and it should be running *****'''

1. Go to:

ftp://ftp.va.gov/VistA/Software/Packages/Gen%20Med%20Rec%20-%20Vitals%20-%20GMRV

2. Install VITL5_0_1.EXE by double clicking on the file name and you will get a pop-up window

3. Click "Run" and when the files finish loading the Vitals Wizard will open

4. Click "Next" and Vitals Wizard will begin the install.

5. Click Next two more times and the files will begin to copy over

6. After the files are copied click "Next" and you will get a screen for Set UP Status

7. Click "Finish" and the Vitals icon should appear on your desktop.

8. Go back to ftp://ftp.va.gov/VistA/Software/Packages/Gen%20Med%20Rec%20-%20Vitals%20-%20GMRV and install VITL5_P18.EXE by double clicking on the file name

9. Click Run and when the files finish loading click "Next"

10. Click "Finish" and the Vital Manager icon should appear on your desktop.

11. Right click on the [[Image:VitalsMicon.JPG]] icon on your desktop and click Properties and the following windows will open:

[[Image:VitalsMproperties.JPG]]

12. Type a space at the end of the "Target" and enter your server IP and Port number into to the end of the target field. (This information can be Copy and Pasted from your CPRS shortcut)
- It should look something as follows:

[[Image:VitalsMproperties2.JPG]]

13. Click "Apply" and click "OK"

14. Repeat steps # 11 - 13 for [[Image:VitalMmgrIcon.JPG]]

15. Open up the Vitals Manager by double cliking on the icon and the login screen will open. Enter the same access and verify code that you use for logging into CPRS and you will then see the following screen:

[[Image:VitalsMopened.JPG]]

16. Click on the '''+''' sign under “Templates” and click on the “System” folder.

17. On the top menu click on "Templates" and then "New Template" from the drop down menu, as seen below:

- The following screen will opoen:

[[Image:VitalsMtemplate2.JPG]]

18. Enter the Template Name. (i.e. All) and click Ok

19. Click on the '''+''' cursor found on the left side of the "Vitals Template Editor" screen.

[[Image:VitalsMtemplate.JPG]]

20. Choose which Vital signs that you want displayed for the template.
*Hint: If you want all of these select the top one and then while holding down the “Shift” key select the last item.

[[Image:VitalsMlist.JPG]]

- Click "OK"

21. Click "Templates" found at the top of the screen then click "Save Template" from the drop down menu bar.

[[Image:VitalsMsave.JPG]]

22. Now the “Vitals” screen should now be working from within the VOE CPRS application.

[[Image:VitalsMend.JPG]]

File:VitalsMend.JPG

2007-03-08T22:00:23Z

JWilson: what it should look like when done

what it should look like when done

File:VitalsMsave.JPG

2007-03-08T21:59:56Z

JWilson: save vitals selected

save vitals selected

File:VitalsMlist.JPG

2007-03-08T21:59:28Z

JWilson: list of vitals

list of vitals

File:VitalsMtemplate2.JPG

2007-03-08T21:59:05Z

JWilson: making template part 2

making template part 2

File:VitalsMtemplate.JPG

2007-03-08T21:58:46Z

JWilson: making template part 1

making template part 1

File:VitalsMopened.JPG

2007-03-08T21:58:14Z

JWilson: open screen of vitals module

open screen of vitals module

Vitals / Measurements

2007-03-08T21:35:59Z

JWilson: made corrections and added some screen shots

=Installing the Vitals module=

'''***You should have VistA installed and it should be running *****'''

1. Go to:

ftp://ftp.va.gov/VistA/Software/Packages/Gen%20Med%20Rec%20-%20Vitals%20-%20GMRV

2. Install VITL5_0_1.EXE by double clicking on the file name and you will get a pop-up window

3. Click "Run" and when the files finish loading the Vitals Wizard will open

4. Click "Next" and Vitals Wizard will begin the install.

5. Click Next two more times and the files will begin to copy over

6. After the files are copied click "Next" and you will get a screen for Set UP Status

7. Click "Finish" and the Vitals icon should appear on your desktop.

8. Go back to ftp://ftp.va.gov/VistA/Software/Packages/Gen%20Med%20Rec%20-%20Vitals%20-%20GMRV and install VITL5_P18.EXE by double clicking on the file name

9. Click Run and when the files finish loading click "Next"

10. Click "Finish" and the Vital Manager icon should appear on your desktop.

11. Right click on the [[Image:VitalsMicon.JPG]] icon on your desktop and click Properties and the following windows will open:

[[Image:VitalsMproperties.JPG]]

12. Type a space at the end of the "Target" and enter your server IP and Port number into to the end of the target field. (This information can be Copy and Pasted from your CPRS shortcut)
- It should look something as follows:

[[Image:VitalsMproperties2.JPG]]

13. Click "Apply" and click "OK"

14. Repeat steps # 11 - 13 for [[Image:VitalMmgrIcon.JPG]]

15. Open up the Vitals Manager and the login screen will open. Enter the same access and verify code that you used for logging into VOE (VistA Office EHR) and you will then see the following screen:

9. Click on the + sign under “Templates” and click on the “System” folder.

10. On the top menu - click on Templates and then New Template from the drop down menu, as seen below:

- The following screen will opoen:

11. Enter the Template Name. (i.e. All) and click Ok

12. Click on the “+” cursor found on the left side of the Vitals Template Editor screen.

13. Choose which Vital signs that you want displayed for the template.
*Hint: If you want all of these select the top one and then while holding down the “Shift” key select the last item.

- Click Ok

14. Click Templates found at the top of the screen then click Save Template from the drop down menu bar.

15. Now the “Vitals” screen should now be working from within the VOE CPRS application.

File:VitalMmgrIcon.JPG

2007-03-08T21:22:24Z

JWilson: vitals module mgr icon

vitals module mgr icon

File:VitalsMproperties2.JPG

2007-03-08T21:21:01Z

JWilson: properties with S and P added

properties with S and P added

File:VitalsMproperties.JPG

2007-03-08T21:19:12Z

JWilson: vitals icon properties

vitals icon properties

File:VitalsMicon.JPG

2007-03-08T21:15:19Z

JWilson: vitals module icon

vitals module icon

Vitals / Measurements

2007-03-08T21:13:08Z

JWilson: Initial

=Installing the Vitals module=

'''***You should have VistA installed and it should be running *****'''

1. Go to:

ftp://ftp.va.gov/VistA/Software/Packages/Gen%20Med%20Rec%20-%20Vitals%20-%20GMRV

2. Install VITL5_0_1.EXE by double clicking on the file name and you will get a pop-up window

3. Click "Run" and when the files finish loading the Vitals Wizard will open

4. Click "Next" and Vitals Wizard will begin the install.

5. Click Next two more times and the files will begin to copy over

6. After the files are copied click "Next" and you will get a screen for Set UP Status

7. Click "Finish" and the Vitals icon should appear on your desktop.

8. Go back to ftp://ftp.va.gov/VistA/Software/Packages/Gen%20Med%20Rec%20-%20Vitals%20-%20GMRV and install VITL5_P18.EXE by double clicking on the file name

9. Click Run and when the files finish loading click "Next"

10. Click "Finish" and the Vital Manager icon should appear on your desktop.

11. Right click on the icon on your desktop and click Properties and the following windows will open:

5. Type a space and your server IP and Port number into to the end of the target field.
- This information can be Copy and Pasted from your VistA shortcut item by right clicking on properties
- It is the S=127.0.0.1 P=9211 portion of the target
- It should look something as follows:

6. Click "Apply" and click "OK"

7. Repeat steps # 4 - 6 for

8. Open up the Vitals Manager and the login screen will open. Enter the same access and verify code that you used for logging into VOE (VistA Office EHR) and you will then see the following screen:

9. Click on the + sign under “Templates” and click on the “System” folder.

10. On the top menu - click on Templates and then New Template from the drop down menu, as seen below:

- The following screen will opoen:

11. Enter the Template Name. (i.e. All) and click Ok

12. Click on the “+” cursor found on the left side of the Vitals Template Editor screen.

13. Choose which Vital signs that you want displayed for the template.
*Hint: If you want all of these select the top one and then while holding down the “Shift” key select the last item.

- Click Ok

14. Click Templates found at the top of the screen then click Save Template from the drop down menu bar.

15. Now the “Vitals” screen should now be working from within the VOE CPRS application.

Routine to Auto start Broker and Taskman (If you are using Cache)

2007-03-08T20:26:29Z

JWilson: added final screen shot

=Routine to Auto start Broker and Taskman=
==(If you are using Cache)==

1) Click on the blue Cache cube and click Studio

- If the cube is not blue you must first start Cache

[[Image:Auto_B_and_T_1.JPG]]

2) Log in by entering you "User Name" and "Password" then click Ok

[[Image:Auto_B_and_T_2.JPG]]

- Once logged in you should see the following screen:

[[Image:Auto_B_and_T_3.JPG]]

3) Click "File", located at the top right of the screen, and click "New" and the following window will open:

[[Image:Auto_B_and_T_4.JPG]]

4) Click on "Cache Object Script Routine" and click "OK"

5) Copy and paste the following into the new window:

ZSTU ;Broker and Taskman Startup ;
ZN "EHR"
D STRT^XWBTCP(9210)
D ^ZTMB
ZN "%SYS"
Q

'''** make sure that there is a space before the ZN, D, D and ZN **'''

6) Click Build, found at the top of the screen, and click Compile

[[Image:Auto_B_and_T_5.JPG]]

7) Change the "File Type" to "Intermediate Routine (*.int") and change the "File Name" to read "ZSTU", as seen below:

[[Image:Auto_B_and_T_6.JPG]]

8) Click Save As then Close

File:Auto B and T 6.JPG

2007-03-08T20:23:12Z

JWilson: saving routine

saving routine

Routine to Auto start Broker and Taskman (If you are using Cache)

2007-03-08T20:19:05Z

JWilson: Added screen shots

Routine to Auto start Broker and Taskman (If you are using Cache)

2007-03-08T17:44:37Z

JWilson: fixed spelling of Cache

=Routine to Auto start Broker and Taskman=
==(If you are using Cache)==

1) Click on the blue Cache cube and click Studio
- If the cube is not blue you must first start Cache

2) Log in by entering you user name and password then click Ok

3) Click File, located at the top right of the screen, and click New

4) Click on Cache Object Script Routine and click Ok

5) Copy and paste the following into the new window:

ZSTU ;Broker and Taskman Startup ;
ZN "EHR"
D STRT^XWBTCP(9210)
D ^ZTMB
ZN "%SYS"
Q

'''** make sure that there is a space before the ZN, D, D and ZN **'''

6) Click Build, found at the top of the screen, and click Compile

7) Change the File Type to Intermediate Routine (*.int) and change the file name to read ZSTU

8) Click Save As then Close

File:Auto B and T 5.JPG

2007-03-08T17:38:18Z

JWilson: script and compile

script and compile

File:Auto B and T 4.JPG

2007-03-08T17:37:46Z

JWilson: object

object

File:Auto B and T 3.JPG

2007-03-08T17:37:09Z

JWilson: open new object

open new object

File:Auto B and T 2.JPG

2007-03-08T17:36:07Z

JWilson: log in

File:Auto B and T 1.JPG

2007-03-08T17:29:28Z

JWilson: to open cache studio

to open cache studio

Routine to Auto start Broker and Taskman (If you are using Cache)

2007-03-08T16:46:33Z

JWilson: Initial

=Routine to Auto start Broker and Taskman=
==(If you are using Cache)==

1) Click on the blue Cahce cube and click Studio
- If the cube is not blue you must first start Cache

2) Log in by entering you user name and password then click Ok

3) Click File, located at the top right of the screen, and click New

4) Click on Cache Object Script Routine and click Ok

5) Copy and paste the following into the new window:

ZSTU ;Broker and Taskman Startup ;
ZN "EHR"
D STRT^XWBTCP(9210)
D ^ZTMB
ZN "%SYS"
Q

'''** make sure that there is a space before the ZN, D, D and ZN **'''

6) Click Build, found at the top of the screen, and click Compile

7) Change the File Type to Intermediate Routine (*.int) and change the file name to read ZSTU

8) Click Save As then Close

User:JWilson

2007-03-08T16:38:35Z

JWilson: initial

Not sure where on the site this should go but if you find a good place for it please fix it.

[[Routine to Auto start Broker and Taskman (If you are using Cache)]]