Difference between revisions of "Ignacio Valdes Implementation Log/Episode37"

Latest revision as of 04:56, 13 November 2020


'''''Update 8/28/2011:''''' If your system is locked up, you have to up the MAX SIGNON ALLOWED as below. After that to prevent it from happening again you run XUS PROCESS COUNT CLEANUP and have Taskman run XUS PROCESS COUNT CLEANUP periodically. Sam says every hour. 

I received the dreaded Maximum number of users already signed on to
this processor problem as well as a Netcall see ^XTER error (not exact
message) This totally hosed my system today for a little while without
warning. I used the system without a problem then used it again 2
hours later and received all these problems. My MAX SIGNON ALLOWED was
256 which apparently wasn't enough. I increased it to 9999 and it
worked. Below is the terminal session for exactly how you increase
this parameter and fix the problem:

-- IV

GTM>D P^DI

VA FileMan 22.0

Select OPTION: ?
    Answer with OPTION NUMBER, or NAME
   Choose from:
   1            ENTER OR EDIT FILE ENTRIES
   2            PRINT FILE ENTRIES
   3            SEARCH FILE ENTRIES
   4            MODIFY FILE ATTRIBUTES
   5            INQUIRE TO FILE ENTRIES
   6            UTILITY FUNCTIONS
   7            OTHER OPTIONS
   8            DATA DICTIONARY UTILITIES
   9            TRANSFER ENTRIES

Select OPTION: 1  ENTER OR EDIT FILE ENTRIES

INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
                                          (1 entry)
EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
   EDIT WHICH VOLUME SET SUB-FIELD: ALL//
THEN EDIT FIELD:

Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
    Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
   1            VISTA.ICH.LOCAL

        You may enter a new KERNEL SYSTEM PARAMETERS, if you wish

    Answer with DOMAIN NAME
   Choose from:
   BETA.VISTA-OFFICE.ORG
   FORUM.VA.GOV
   OPENFORUM.WORLDVISTA.ORG
   PLATINUM.VISTA-OFFICE.ORG
   PLATINUM.VISTA.MED.VA.GOV
   VAMHVWEB1.AAC.VA.GOV
   VISTA.ICH.LOCAL

Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
         ...OK? Yes//   (Yes)

Select VOLUME SET: EHR//
  VOLUME SET: EHR//
  MAX SIGNON ALLOWED: 256// 9999
  LOG SYSTEM RT?: NO//
Select VOLUME SET:

Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:

Select OPTION:
GTM>h

    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post:
Cancel
		
		
Send  Discard
		
		
From: 	
ivaldes1@gmail.com <ivaldes1@gmail.com>
To: 	
Cc: 	
Followup To: 	
	
Add Cc | Add Followup-to | Edit Subject 	
Subject: 	
		
Validation: 	
For [[verification~|Verification]] purposes please type the characters you see in the picture below or the numbers you hear by clicking the accessibility icon. Listen and type the numbers you hear
Send  Discard
	
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
I, Valdes   	
View profile  
	 More options Dec 17 2008, 4:32 pm
From: "I, Valdes" <ival...@hal-pc.org>
Date: Wed, 17 Dec 2008 13:32:30 -0800 (PST)
Local: Wed, Dec 17 2008 4:32 pm
Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
The CPRS error message for this was Error encountered. Function was:
NetCall Error was: M Error - Use ^XTER

On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:

- Hide quoted text -
- Show quoted text -
> I received the dreaded Maximum number of users already signed on to
> this processor problem as well as a Netcall see ^XTER error (not exact
> message) This totally hosed my system today for a little while without
> warning. I used the system without a problem then used it again 2
> hours later and received all these problems. My MAX SIGNON ALLOWED was
> 256 which apparently wasn't enough. I increased it to 9999 and it
> worked. Below is the terminal session for exactly how you increase
> this parameter and fix the problem:

> -- IV

> GTM>D P^DI

> VA FileMan 22.0

> Select OPTION: ?
>     Answer with OPTION NUMBER, or NAME
>    Choose from:
>    1            ENTER OR EDIT FILE ENTRIES
>    2            PRINT FILE ENTRIES
>    3            SEARCH FILE ENTRIES
>    4            MODIFY FILE ATTRIBUTES
>    5            INQUIRE TO FILE ENTRIES
>    6            UTILITY FUNCTIONS
>    7            OTHER OPTIONS
>    8            DATA DICTIONARY UTILITIES
>    9            TRANSFER ENTRIES

> Select OPTION: 1  ENTER OR EDIT FILE ENTRIES

> INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
>                                           (1 entry)
> EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
>    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
> THEN EDIT FIELD:

> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
>     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
>    1            VISTA.ICH.LOCAL

>         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish

>     Answer with DOMAIN NAME
>    Choose from:
>    BETA.VISTA-OFFICE.ORG
>    FORUM.VA.GOV
>    OPENFORUM.WORLDVISTA.ORG
>    PLATINUM.VISTA-OFFICE.ORG
>    PLATINUM.VISTA.MED.VA.GOV
>    VAMHVWEB1.AAC.VA.GOV
>    VISTA.ICH.LOCAL

> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
>          ...OK? Yes//   (Yes)

> Select VOLUME SET: EHR//
>   VOLUME SET: EHR//
>   MAX SIGNON ALLOWED: 256// 9999
>   LOG SYSTEM RT?: NO//
> Select VOLUME SET:

> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:

> Select OPTION:
> GTM>h


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
Greg Woodhouse   	
View profile  
	 More options Dec 17 2008, 4:45 pm
From: "Greg Woodhouse" <gregory.woodho...@gmail.com>
Date: Wed, 17 Dec 2008 13:45:28 -0800
Local: Wed, Dec 17 2008 4:45 pm
Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author

In most cases, this means the peer process (i.e., the one on the MUMPS side)
terminated abnormally due to an error, and the connection was lost. You can
either review the error log through the menu system or (as is more common)
with D ^XTER. This will allow you to see what the error was, what the
process environment lookeed like (i.e., get a dump of the symbol table) and
stack trace. This information can be invaluable in tracking down problems.
It may seem overwhelming at first, but an experienced developer can often
see the problem in minutes or seconds this way. Of course, fixing it may be
another matter. :)

- Hide quoted text -
- Show quoted text -
On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org> wrote:

> The CPRS error message for this was Error encountered. Function was:
> NetCall Error was: M Error - Use ^XTER

> On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
> > I received the dreaded Maximum number of users already signed on to
> > this processor problem as well as a Netcall see ^XTER error (not exact
> > message) This totally hosed my system today for a little while without
> > warning. I used the system without a problem then used it again 2
> > hours later and received all these problems. My MAX SIGNON ALLOWED was
> > 256 which apparently wasn't enough. I increased it to 9999 and it
> > worked. Below is the terminal session for exactly how you increase
> > this parameter and fix the problem:

> > -- IV

> > GTM>D P^DI

> > VA FileMan 22.0

> > Select OPTION: ?
> >     Answer with OPTION NUMBER, or NAME
> >    Choose from:
> >    1            ENTER OR EDIT FILE ENTRIES
> >    2            PRINT FILE ENTRIES
> >    3            SEARCH FILE ENTRIES
> >    4            MODIFY FILE ATTRIBUTES
> >    5            INQUIRE TO FILE ENTRIES
> >    6            UTILITY FUNCTIONS
> >    7            OTHER OPTIONS
> >    8            DATA DICTIONARY UTILITIES
> >    9            TRANSFER ENTRIES

> > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES

> > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
> >                                           (1 entry)
> > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
> >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
> > THEN EDIT FIELD:

> > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
> >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
> >    1            VISTA.ICH.LOCAL

> >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish

> >     Answer with DOMAIN NAME
> >    Choose from:
> >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/>
> >    FORUM.VA.GOV <http://forum.va.gov/>
> >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/>
> >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/>
> >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/>
> >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/>
> >    VISTA.ICH.LOCAL

> > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
> >          ...OK? Yes//   (Yes)

> > Select VOLUME SET: EHR//
> >   VOLUME SET: EHR//
> >   MAX SIGNON ALLOWED: 256// 9999
> >   LOG SYSTEM RT?: NO//
> > Select VOLUME SET:

> > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:

> > Select OPTION:
> > GTM>h


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
I, Valdes   	
View profile  
	 More options Dec 17 2008, 5:02 pm
From: "I, Valdes" <ival...@hal-pc.org>
Date: Wed, 17 Dec 2008 14:02:00 -0800 (PST)
Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
Thanks Greg, in this case, reviewing the error log revealed nothing as
no error was logged. The system just goes kerplunk and stayed there
without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256.
It has been running for months without problems.

-- IV

On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
wrote:

- Hide quoted text -
- Show quoted text -
> In most cases, this means the peer process (i.e., the one on the MUMPS side)
> terminated abnormally due to an error, and the connection was lost. You can
> either review the error log through the menu system or (as is more common)
> with D ^XTER. This will allow you to see what the error was, what the
> process environment lookeed like (i.e., get a dump of the symbol table) and
> stack trace. This information can be invaluable in tracking down problems.
> It may seem overwhelming at first, but an experienced developer can often
> see the problem in minutes or seconds this way. Of course, fixing it may be
> another matter. :)

> On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org> wrote:

> > The CPRS error message for this was Error encountered. Function was:
> > NetCall Error was: M Error - Use ^XTER

> > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
> > > I received the dreaded Maximum number of users already signed on to
> > > this processor problem as well as a Netcall see ^XTER error (not exact
> > > message) This totally hosed my system today for a little while without
> > > warning. I used the system without a problem then used it again 2
> > > hours later and received all these problems. My MAX SIGNON ALLOWED was
> > > 256 which apparently wasn't enough. I increased it to 9999 and it
> > > worked. Below is the terminal session for exactly how you increase
> > > this parameter and fix the problem:

> > > -- IV

> > > GTM>D P^DI

> > > VA FileMan 22.0

> > > Select OPTION: ?
> > >     Answer with OPTION NUMBER, or NAME
> > >    Choose from:
> > >    1            ENTER OR EDIT FILE ENTRIES
> > >    2            PRINT FILE ENTRIES
> > >    3            SEARCH FILE ENTRIES
> > >    4            MODIFY FILE ATTRIBUTES
> > >    5            INQUIRE TO FILE ENTRIES
> > >    6            UTILITY FUNCTIONS
> > >    7            OTHER OPTIONS
> > >    8            DATA DICTIONARY UTILITIES
> > >    9            TRANSFER ENTRIES

> > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES

> > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
> > >                                           (1 entry)
> > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
> > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
> > > THEN EDIT FIELD:

> > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
> > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
> > >    1            VISTA.ICH.LOCAL

> > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish

> > >     Answer with DOMAIN NAME
> > >    Choose from:
> > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/>
> > >    FORUM.VA.GOV <http://forum.va.gov/>
> > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/>
> > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/>
> > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/>
> > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/>
> > >    VISTA.ICH.LOCAL

> > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
> > >          ...OK? Yes//   (Yes)

> > > Select VOLUME SET: EHR//
> > >   VOLUME SET: EHR//
> > >   MAX SIGNON ALLOWED: 256// 9999
> > >   LOG SYSTEM RT?: NO//
> > > Select VOLUME SET:

> > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:

> > > Select OPTION:
> > > GTM>h


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
Greg Woodhouse   	
View profile  
Okay, that makes sense. Even if the process terminates *normally* through QUIT, the connection will still be lost. Are you not able to increase the maximum number of users? - Hide quoted text -- Show quoted text -On Wed, Dec 17, 2008 at 2:02 PM, I, Valdes <ival...@hal-pc.org> wrote: > Thanks Greg, in this case, reviewing the error log revealed nothing as > no error was logged. The system just goes kerplunk and stayed there > without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256. > It has been running for months without problems. > -- IV > On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com> > wrote: > > In most cases, this means the peer process (i.e., the one on the MUMPS > side) > > terminated abnormally due to an error, and the connection was lost. You > can > > either review the error log through the menu system or (as is more > common) > > with D ^XTER. This will allow you to see what the error was, what the > > process environment lookeed like (i.e., get a dump of the symbol table) > and > > stack trace. This information can be invaluable in tracking down > problems. > > It may seem overwhelming at first, but an experienced developer can often > > see the problem in minutes or seconds this way. Of course, fixing it may > be > > another matter. :) >  > On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org> wrote: > > > The CPRS error message for this was Error encountered. Function was: > > > NetCall Error was: M Error - Use ^XTER > > > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote: > > > > I received the dreaded Maximum number of users already signed on to > > > > this processor problem as well as a Netcall see ^XTER error (not > exact > > > > message) This totally hosed my system today for a little while > without > > > > warning. I used the system without a problem then used it again 2 > > > > hours later and received all these problems. My MAX SIGNON ALLOWED > was > > > > 256 which apparently wasn't enough. I increased it to 9999 and it > > > > worked. Below is the terminal session for exactly how you increase > > > > this parameter and fix the problem: > > > > -- IV > > > > GTM>D P^DI > > > > VA FileMan 22.0 > > > > Select OPTION: ? > > > >     Answer with OPTION NUMBER, or NAME > > > >    Choose from: > > > >    1            ENTER OR EDIT FILE ENTRIES > > > >    2            PRINT FILE ENTRIES > > > >    3            SEARCH FILE ENTRIES > > > >    4            MODIFY FILE ATTRIBUTES > > > >    5            INQUIRE TO FILE ENTRIES > > > >    6            UTILITY FUNCTIONS > > > >    7            OTHER OPTIONS > > > >    8            DATA DICTIONARY UTILITIES > > > >    9            TRANSFER ENTRIES > > > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES > > > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS > > > >                                           (1 entry) > > > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple) > > > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL// > > > > THEN EDIT FIELD: > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ? > > > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME: > > > >    1            VISTA.ICH.LOCAL > > > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish > > > >     Answer with DOMAIN NAME > > > >    Choose from: > > > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/> < > http://beta.vista-office.org/> > > > >    FORUM.VA.GOV <http://forum.va.gov/> <http://forum.va.gov/> > > > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/> < > http://openforum.worldvista.org/> > > > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/> < > http://platinum.vista-office.org/> > > > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/> < > http://platinum.vista.med.va.gov/> > > > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/> < > http://vamhvweb1.aac.va.gov/> >  > > >    VISTA.ICH.LOCAL > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL > > > >          ...OK? Yes//   (Yes) > > > > Select VOLUME SET: EHR// > > > >   VOLUME SET: EHR// > > > >   MAX SIGNON ALLOWED: 256// 9999 > > > >   LOG SYSTEM RT?: NO// > > > > Select VOLUME SET: > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: > > > > Select OPTION: > > > > GTM>h
	 More options Dec 17 2008, 5:12 pm
From: "Greg Woodhouse" <gregory.woodho...@gmail.com>
Date: Wed, 17 Dec 2008 14:12:41 -0800
Local: Wed, Dec 17 2008 5:12 pm
Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author

Okay, that makes sense. Even if the process terminates *normally* through
QUIT, the connection will still be lost.

Are you not able to increase the maximum number of users?

- Hide quoted text -
- Show quoted text -
On Wed, Dec 17, 2008 at 2:02 PM, I, Valdes <ival...@hal-pc.org> wrote:

> Thanks Greg, in this case, reviewing the error log revealed nothing as
> no error was logged. The system just goes kerplunk and stayed there
> without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256.
> It has been running for months without problems.

> -- IV

> On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
> wrote:
> > In most cases, this means the peer process (i.e., the one on the MUMPS
> side)
> > terminated abnormally due to an error, and the connection was lost. You
> can
> > either review the error log through the menu system or (as is more
> common)
> > with D ^XTER. This will allow you to see what the error was, what the
> > process environment lookeed like (i.e., get a dump of the symbol table)
> and
> > stack trace. This information can be invaluable in tracking down
> problems.
> > It may seem overwhelming at first, but an experienced developer can often
> > see the problem in minutes or seconds this way. Of course, fixing it may
> be
> > another matter. :)

>  > On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org> wrote:

> > > The CPRS error message for this was Error encountered. Function was:
> > > NetCall Error was: M Error - Use ^XTER

> > > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
> > > > I received the dreaded Maximum number of users already signed on to
> > > > this processor problem as well as a Netcall see ^XTER error (not
> exact
> > > > message) This totally hosed my system today for a little while
> without
> > > > warning. I used the system without a problem then used it again 2
> > > > hours later and received all these problems. My MAX SIGNON ALLOWED
> was
> > > > 256 which apparently wasn't enough. I increased it to 9999 and it
> > > > worked. Below is the terminal session for exactly how you increase
> > > > this parameter and fix the problem:

> > > > -- IV

> > > > GTM>D P^DI

> > > > VA FileMan 22.0

> > > > Select OPTION: ?
> > > >     Answer with OPTION NUMBER, or NAME
> > > >    Choose from:
> > > >    1            ENTER OR EDIT FILE ENTRIES
> > > >    2            PRINT FILE ENTRIES
> > > >    3            SEARCH FILE ENTRIES
> > > >    4            MODIFY FILE ATTRIBUTES
> > > >    5            INQUIRE TO FILE ENTRIES
> > > >    6            UTILITY FUNCTIONS
> > > >    7            OTHER OPTIONS
> > > >    8            DATA DICTIONARY UTILITIES
> > > >    9            TRANSFER ENTRIES

> > > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES

> > > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
> > > >                                           (1 entry)
> > > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
> > > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
> > > > THEN EDIT FIELD:

> > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
> > > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
> > > >    1            VISTA.ICH.LOCAL

> > > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish

> > > >     Answer with DOMAIN NAME
> > > >    Choose from:
> > > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/> <
> http://beta.vista-office.org/>
> > > >    FORUM.VA.GOV <http://forum.va.gov/> <http://forum.va.gov/>
> > > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/> <
> http://openforum.worldvista.org/>
> > > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/> <
> http://platinum.vista-office.org/>
> > > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/> <
> http://platinum.vista.med.va.gov/>
> > > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/> <
> http://vamhvweb1.aac.va.gov/>
>  > > >    VISTA.ICH.LOCAL

> > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
> > > >          ...OK? Yes//   (Yes)

> > > > Select VOLUME SET: EHR//
> > > >   VOLUME SET: EHR//
> > > >   MAX SIGNON ALLOWED: 256// 9999
> > > >   LOG SYSTEM RT?: NO//
> > > > Select VOLUME SET:

> > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:

> > > > Select OPTION:
> > > > GTM>h


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
Cancel
		
		
Send  Discard
		
		
From: 	
ivaldes1@gmail.com <ivaldes1@gmail.com>
To: 	
Cc: 	
Followup To: 	
	
Add Cc | Add Followup-to | Edit Subject 	
Subject: 	
		
Validation: 	
For [[verification~|Verification]] purposes please type the characters you see in the picture below or the numbers you hear by clicking the accessibility icon. Listen and type the numbers you hear
Send  Discard
	
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
I, Valdes   	
View profile  
	 More options Dec 17 2008, 5:24 pm
From: "I, Valdes" <ival...@hal-pc.org>
Date: Wed, 17 Dec 2008 14:24:11 -0800 (PST)
Local: Wed, Dec 17 2008 5:24 pm
Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
The only way I could login and increase the maximum number of users
was by using putty.exe into the server and getting to a gtm [[prompt~|Prompt]]
direct. That was successful. -- IV

On Dec 17, 4:12 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
wrote:

- Hide quoted text -
- Show quoted text -
> Okay, that makes sense. Even if the process terminates *normally* through
> QUIT, the connection will still be lost.

> Are you not able to increase the maximum number of users?

> On Wed, Dec 17, 2008 at 2:02 PM, I, Valdes <ival...@hal-pc.org> wrote:

> > Thanks Greg, in this case, reviewing the error log revealed nothing as
> > no error was logged. The system just goes kerplunk and stayed there
> > without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256.
> > It has been running for months without problems.

> > -- IV

> > On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
> > wrote:
> > > In most cases, this means the peer process (i.e., the one on the MUMPS
> > side)
> > > terminated abnormally due to an error, and the connection was lost. You
> > can
> > > either review the error log through the menu system or (as is more
> > common)
> > > with D ^XTER. This will allow you to see what the error was, what the
> > > process environment lookeed like (i.e., get a dump of the symbol table)
> > and
> > > stack trace. This information can be invaluable in tracking down
> > problems.
> > > It may seem overwhelming at first, but an experienced developer can often
> > > see the problem in minutes or seconds this way. Of course, fixing it may
> > be
> > > another matter. :)

> >  > On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org> wrote:

> > > > The CPRS error message for this was Error encountered. Function was:
> > > > NetCall Error was: M Error - Use ^XTER

> > > > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
> > > > > I received the dreaded Maximum number of users already signed on to
> > > > > this processor problem as well as a Netcall see ^XTER error (not
> > exact
> > > > > message) This totally hosed my system today for a little while
> > without
> > > > > warning. I used the system without a problem then used it again 2
> > > > > hours later and received all these problems. My MAX SIGNON ALLOWED
> > was
> > > > > 256 which apparently wasn't enough. I increased it to 9999 and it
> > > > > worked. Below is the terminal session for exactly how you increase
> > > > > this parameter and fix the problem:

> > > > > -- IV

> > > > > GTM>D P^DI

> > > > > VA FileMan 22.0

> > > > > Select OPTION: ?
> > > > >     Answer with OPTION NUMBER, or NAME
> > > > >    Choose from:
> > > > >    1            ENTER OR EDIT FILE ENTRIES
> > > > >    2            PRINT FILE ENTRIES
> > > > >    3            SEARCH FILE ENTRIES
> > > > >    4            MODIFY FILE ATTRIBUTES
> > > > >    5            INQUIRE TO FILE ENTRIES
> > > > >    6            UTILITY FUNCTIONS
> > > > >    7            OTHER OPTIONS
> > > > >    8            DATA DICTIONARY UTILITIES
> > > > >    9            TRANSFER ENTRIES

> > > > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES

> > > > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
> > > > >                                           (1 entry)
> > > > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
> > > > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
> > > > > THEN EDIT FIELD:

> > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
> > > > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
> > > > >    1            VISTA.ICH.LOCAL

> > > > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish

> > > > >     Answer with DOMAIN NAME
> > > > >    Choose from:
> > > > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/> <
> >http://beta.vista-office.org/>
> > > > >    FORUM.VA.GOV <http://forum.va.gov/> <http://forum.va.gov/>
> > > > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/> <
> >http://openforum.worldvista.org/>
> > > > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/> <
> >http://platinum.vista-office.org/>
> > > > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/> <
> >http://platinum.vista.med.va.gov/>
> > > > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/> <
> >http://vamhvweb1.aac.va.gov/>
> >  > > >    VISTA.ICH.LOCAL

> > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
> > > > >          ...OK? Yes//   (Yes)

> > > > > Select VOLUME SET: EHR//
> > > > >   VOLUME SET: EHR//
> > > > >   MAX SIGNON ALLOWED: 256// 9999
> > > > >   LOG SYSTEM RT?: NO//
> > > > > Select VOLUME SET:

> > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:

> > > > > Select OPTION:
> > > > > GTM>h


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
Greg Woodhouse   	
View profile  
	 More options Dec 17 2008, 5:35 pm
From: "Greg Woodhouse" <gregory.woodho...@gmail.com>
Date: Wed, 17 Dec 2008 14:35:57 -0800
Local: Wed, Dec 17 2008 5:35 pm
Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author

Bear in mind that this is a system administration task. It is to be expected
that adminisrative tasks will require you to log in to the character mode
interface.

Now, in principle, it is possible to develop a GUI administrative console,
and this is becoming more and more common. For example, Weblogic and
Glassfish have them. But VistA does not.

- Hide quoted text -
- Show quoted text -
On Wed, Dec 17, 2008 at 2:24 PM, I, Valdes <ival...@hal-pc.org> wrote:

> The only way I could login and increase the maximum number of users
> was by using putty.exe into the server and getting to a gtm [[prompt~|Prompt]]
> direct. That was successful. -- IV

> On Dec 17, 4:12 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
> wrote:
> > Okay, that makes sense. Even if the process terminates *normally* through
> > QUIT, the connection will still be lost.

> > Are you not able to increase the maximum number of users?

>  > On Wed, Dec 17, 2008 at 2:02 PM, I, Valdes <ival...@hal-pc.org> wrote:

> > > Thanks Greg, in this case, reviewing the error log revealed nothing as
> > > no error was logged. The system just goes kerplunk and stayed there
> > > without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256.
> > > It has been running for months without problems.

> > > -- IV

> > > On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
> > > wrote:
> > > > In most cases, this means the peer process (i.e., the one on the
> MUMPS
> > > side)
> > > > terminated abnormally due to an error, and the connection was lost.
> You
> > > can
> > > > either review the error log through the menu system or (as is more
> > > common)
> > > > with D ^XTER. This will allow you to see what the error was, what the
> > > > process environment lookeed like (i.e., get a dump of the symbol
> table)
> > > and
> > > > stack trace. This information can be invaluable in tracking down
> > > problems.
> > > > It may seem overwhelming at first, but an experienced developer can
> often
> > > > see the problem in minutes or seconds this way. Of course, fixing it
> may
> > > be
> > > > another matter. :)

> > >  > On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org>
> wrote:

> > > > > The CPRS error message for this was Error encountered. Function
> was:
> > > > > NetCall Error was: M Error - Use ^XTER

> > > > > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
> > > > > > I received the dreaded Maximum number of users already signed on
> to
> > > > > > this processor problem as well as a Netcall see ^XTER error (not
> > > exact
> > > > > > message) This totally hosed my system today for a little while
> > > without
> > > > > > warning. I used the system without a problem then used it again 2
> > > > > > hours later and received all these problems. My MAX SIGNON
> ALLOWED
> > > was
> > > > > > 256 which apparently wasn't enough. I increased it to 9999 and it
> > > > > > worked. Below is the terminal session for exactly how you
> increase
> > > > > > this parameter and fix the problem:

> > > > > > -- IV

> > > > > > GTM>D P^DI

> > > > > > VA FileMan 22.0

> > > > > > Select OPTION: ?
> > > > > >     Answer with OPTION NUMBER, or NAME
> > > > > >    Choose from:
> > > > > >    1            ENTER OR EDIT FILE ENTRIES
> > > > > >    2            PRINT FILE ENTRIES
> > > > > >    3            SEARCH FILE ENTRIES
> > > > > >    4            MODIFY FILE ATTRIBUTES
> > > > > >    5            INQUIRE TO FILE ENTRIES
> > > > > >    6            UTILITY FUNCTIONS
> > > > > >    7            OTHER OPTIONS
> > > > > >    8            DATA DICTIONARY UTILITIES
> > > > > >    9            TRANSFER ENTRIES

> > > > > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES

> > > > > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
> > > > > >                                           (1 entry)
> > > > > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
> > > > > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
> > > > > > THEN EDIT FIELD:

> > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
> > > > > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
> > > > > >    1            VISTA.ICH.LOCAL

> > > > > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish

> > > > > >     Answer with DOMAIN NAME
> > > > > >    Choose from:
> > > > > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/> <
> http://beta.vista-office.org/> <
> > >http://beta.vista-office.org/>
> > > > > >    FORUM.VA.GOV <http://forum.va.gov/> <http://forum.va.gov/> <
> http://forum.va.gov/>
>  > > > > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/><
> http://openforum.worldvista.org/> <
> > >http://openforum.worldvista.org/>
> > > > > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/><
> http://platinum.vista-office.org/> <
> > >http://platinum.vista-office.org/>
> > > > > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/><
> http://platinum.vista.med.va.gov/> <
> > >http://platinum.vista.med.va.gov/>
> > > > > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/> <
> http://vamhvweb1.aac.va.gov/> <
> > >http://vamhvweb1.aac.va.gov/>
> > >  > > >    VISTA.ICH.LOCAL

> > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
> > > > > >          ...OK? Yes//   (Yes)

> > > > > > Select VOLUME SET: EHR//
> > > > > >   VOLUME SET: EHR//
> > > > > >   MAX SIGNON ALLOWED: 256// 9999
> > > > > >   LOG SYSTEM RT?: NO//
> > > > > > Select VOLUME SET:

> > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:

> > > > > > Select OPTION:
> > > > > > GTM>h


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
I, Valdes   	
View profile  
	 More options Dec 17 2008, 5:49 pm
From: "I, Valdes" <ival...@hal-pc.org>
Date: Wed, 17 Dec 2008 14:49:10 -0800 (PST)
Local: Wed, Dec 17 2008 5:49 pm
Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
Kevin Toppenberg's GUI-Config is a great start. -- IV

On Dec 17, 4:35 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
wrote:

- Hide quoted text -
- Show quoted text -
> Bear in mind that this is a system administration task. It is to be expected
> that adminisrative tasks will require you to log in to the character mode
> interface.

> Now, in principle, it is possible to develop a GUI administrative console,
> and this is becoming more and more common. For example, Weblogic and
> Glassfish have them. But VistA does not.

> On Wed, Dec 17, 2008 at 2:24 PM, I, Valdes <ival...@hal-pc.org> wrote:

> > The only way I could login and increase the maximum number of users
> > was by using putty.exe into the server and getting to a gtm [[prompt~|Prompt]]
> > direct. That was successful. -- IV

> > On Dec 17, 4:12 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
> > wrote:
> > > Okay, that makes sense. Even if the process terminates *normally* through
> > > QUIT, the connection will still be lost.

> > > Are you not able to increase the maximum number of users?

> >  > On Wed, Dec 17, 2008 at 2:02 PM, I, Valdes <ival...@hal-pc.org> wrote:

> > > > Thanks Greg, in this case, reviewing the error log revealed nothing as
> > > > no error was logged. The system just goes kerplunk and stayed there
> > > > without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256.
> > > > It has been running for months without problems.

> > > > -- IV

> > > > On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
> > > > wrote:
> > > > > In most cases, this means the peer process (i.e., the one on the
> > MUMPS
> > > > side)
> > > > > terminated abnormally due to an error, and the connection was lost.
> > You
> > > > can
> > > > > either review the error log through the menu system or (as is more
> > > > common)
> > > > > with D ^XTER. This will allow you to see what the error was, what the
> > > > > process environment lookeed like (i.e., get a dump of the symbol
> > table)
> > > > and
> > > > > stack trace. This information can be invaluable in tracking down
> > > > problems.
> > > > > It may seem overwhelming at first, but an experienced developer can
> > often
> > > > > see the problem in minutes or seconds this way. Of course, fixing it
> > may
> > > > be
> > > > > another matter. :)

> > > >  > On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org>
> > wrote:

> > > > > > The CPRS error message for this was Error encountered. Function
> > was:
> > > > > > NetCall Error was: M Error - Use ^XTER

> > > > > > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
> > > > > > > I received the dreaded Maximum number of users already signed on
> > to
> > > > > > > this processor problem as well as a Netcall see ^XTER error (not
> > > > exact
> > > > > > > message) This totally hosed my system today for a little while
> > > > without
> > > > > > > warning. I used the system without a problem then used it again 2
> > > > > > > hours later and received all these problems. My MAX SIGNON
> > ALLOWED
> > > > was
> > > > > > > 256 which apparently wasn't enough. I increased it to 9999 and it
> > > > > > > worked. Below is the terminal session for exactly how you
> > increase
> > > > > > > this parameter and fix the problem:

> > > > > > > -- IV

> > > > > > > GTM>D P^DI

> > > > > > > VA FileMan 22.0

> > > > > > > Select OPTION: ?
> > > > > > >     Answer with OPTION NUMBER, or NAME
> > > > > > >    Choose from:
> > > > > > >    1            ENTER OR EDIT FILE ENTRIES
> > > > > > >    2            PRINT FILE ENTRIES
> > > > > > >    3            SEARCH FILE ENTRIES
> > > > > > >    4            MODIFY FILE ATTRIBUTES
> > > > > > >    5            INQUIRE TO FILE ENTRIES
> > > > > > >    6            UTILITY FUNCTIONS
> > > > > > >    7            OTHER OPTIONS
> > > > > > >    8            DATA DICTIONARY UTILITIES
> > > > > > >    9            TRANSFER ENTRIES

> > > > > > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES

> > > > > > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
> > > > > > >                                           (1 entry)
> > > > > > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
> > > > > > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
> > > > > > > THEN EDIT FIELD:

> > > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
> > > > > > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
> > > > > > >    1            VISTA.ICH.LOCAL

> > > > > > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish

> > > > > > >     Answer with DOMAIN NAME
> > > > > > >    Choose from:
> > > > > > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/> <
> >http://beta.vista-office.org/> <
> > > >http://beta.vista-office.org/>
> > > > > > >    FORUM.VA.GOV <http://forum.va.gov/> <http://forum.va.gov/> <
> >http://forum.va.gov/>
> >  > > > > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/><
> >http://openforum.worldvista.org/> <
> > > >http://openforum.worldvista.org/>
> > > > > > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/><
> >http://platinum.vista-office.org/> <
> > > >http://platinum.vista-office.org/>
> > > > > > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/><
> >http://platinum.vista.med.va.gov/> <
> > > >http://platinum.vista.med.va.gov/>
> > > > > > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/> <
> >http://vamhvweb1.aac.va.gov/> <
> > > >http://vamhvweb1.aac.va.gov/>
> > > >  > > >    VISTA.ICH.LOCAL

> > > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
> > > > > > >          ...OK? Yes//   (Yes)

> > > > > > > Select VOLUME SET: EHR//
> > > > > > >   VOLUME SET: EHR//
> > > > > > >   MAX SIGNON ALLOWED: 256// 9999
> > > > > > >   LOG SYSTEM RT?: NO//
> > > > > > > Select VOLUME SET:

> > > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:

> > > > > > > Select OPTION:
> > > > > > > GTM>h


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post:
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
I, Valdes   	
View profile  
	 More options Dec 18 2008, 5:18 pm
From: "I, Valdes" <ival...@hal-pc.org>
Date: Thu, 18 Dec 2008 14:18:53 -0800 (PST)
Local: Thurs, Dec 18 2008 5:18 pm
Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
default to 9999 in the download WorldVistA version? This is a
particularly nasty problem and is the only one so far that briefly
rendered the system unusable. Not good when you have a patient waiting
and the system is giving you this error. -- IV

    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post:
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
John McCormack   	
View profile  
	 More options Dec 18 2008, 7:26 pm
From: John McCormack <johnm...@ix.netcom.com>
Date: Thu, 18 Dec 2008 18:26:02 -0600
Local: Thurs, Dec 18 2008 7:26 pm
Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author

This is treating the symptom. You'll need to find the cause. Did you
perform a system status to see how many and what processes were running
which would cause the previous limit to be reached?

It's kinda of like finding an unconscious patient with shortness of
breath. You keep giving them more oxygen however until you roll them
over and find the sucking chest wound the cause is not being treated.
When you treat the cause then the symptoms will subside. Put another way
this parameter is your "canary in the coal mine". 

I was under the impression that Max Signon would be the number of people on
the system at once, not a cumulative total which sounds like what is
happening. Maybe some step in the code is not working correctly here?

On Thursday 18 December 2008, I, Valdes wrote:

> Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
> default to 9999 in the download WorldVistA version? This is a
> particularly nasty problem and is the only one so far that briefly
> rendered the system unusable. Not good when you have a patient waiting
> and the system is giving you this error. -- IV

-- 
Nancy Anthracite

    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
I, Valdes   	
View profile  
	 More options Feb 11, 9:43 pm
From: "I, Valdes" <ival...@hal-pc.org>
Date: Wed, 11 Feb 2009 18:43:25 -0800 (PST)
Local: Wed, Feb 11 2009 9:43 pm
Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
Say, is anyone working on this to get it fixed in the main-line
WorldVistA? -- IV

On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:

- Hide quoted text -
- Show quoted text -
> Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
> default to9999in the download WorldVistA version? This is a
> particularly nasty problem and is the only one so far that briefly
> rendered the system unusable. Not good when you have a patient waiting
> and the system is giving you this error. -- IV


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
Nancy Anthracite   	
View profile  
	 More options Feb 11, 10:01 pm
From: Nancy Anthracite <nanthrac...@verizon.net>
Date: Wed, 11 Feb 2009 22:01:48 -0500
Local: Wed, Feb 11 2009 10:01 pm
Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
I have yet to see any evidence that this is a problem due to WorldVistA EHR.  
Do you have more folks signed on than allowed?  If not, did you identify the
source of the problem?

On Wednesday 11 February 2009, I, Valdes wrote:

> Say, is anyone working on this to get it fixed in the main-line
> WorldVistA? -- IV

> On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
> > Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
> > default to9999in the download WorldVistA version? This is a
> > particularly nasty problem and is the only one so far that briefly
> > rendered the system unusable. Not good when you have a patient waiting
> > and the system is giving you this error. -- IV

-- 
Nancy Anthracite

    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
I, Valdes   	
View profile  
	 More options Feb 11, 11:22 pm
From: "I, Valdes" <ival...@hal-pc.org>
Date: Wed, 11 Feb 2009 20:22:00 -0800 (PST)
Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
There were possibly 3 users on the system at most. If I was qualified
to diagnose and identify the exact source of the problem I wouldn't be
asking here. I am not the only one that has reported this problem. I
am the only one that I know of to publish in detail exactly how you
slap a band-aid on it. I do wonder what resources WorldVistA is
bringing to bear to at least investigate this and hopefully fix it and
put the fix in the main line distribution in a timely manner? I would
fix it myself it I had the skills, knowledge and experience. I do not
have those yet.  -- IV

On Feb 11, 9:01 pm, Nancy Anthracite <nanthrac...@verizon.net> wrote:

- Hide quoted text -
- Show quoted text -
> I have yet to see any evidence that this is a problem due to WorldVistA EHR.  
> Do you have more folks signed on than allowed?  If not, did you identify the
> source of the problem?

> On Wednesday 11 February 2009, I, Valdes wrote:

> > Say, is anyone working on this to get it fixed in the main-line
> > WorldVistA? -- IV

> > On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
> > > Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
> > > default to9999in the download WorldVistA version? This is a
> > > particularly nasty problem and is the only one so far that briefly
> > > rendered the system unusable. Not good when you have a patient waiting
> > > and the system is giving you this error. -- IV

> --
> Nancy Anthracite


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
Nancy Anthracite   	
View profile  
	 More options Feb 11, 11:48 pm
From: Nancy Anthracite <nanthrac...@verizon.net>
Date: Wed, 11 Feb 2009 23:48:49 -0500
Local: Wed, Feb 11 2009 11:48 pm
Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
Without a way to reproduce the problem, it is a little difficult to fix it.  
My suggestion would have been to get an expert on your system at the time it
happened to see if the problem could have been diagnosed.  It could well have
had nothing to do with VistA at all and the fix that you thought you made for
the problem may not have really been what really fixed it.  

On Wednesday 11 February 2009, I, Valdez wrote:

- Hide quoted text -
- Show quoted text -
> There were possibly 3 users on the system at most. If I was qualified
> to diagnose and identify the exact source of the problem I wouldn't be
> asking here. I am not the only one that has reported this problem. I
> am the only one that I know of to publish in detail exactly how you
> slap a band-aid on it. I do wonder what resources WorldVistA is
> bringing to bear to at least investigate this and hopefully fix it and
> put the fix in the main line distribution in a timely manner? I would
> fix it myself it I had the skills, knowledge and experience. I do not
> have those yet.  -- IV

> On Feb 11, 9:01 pm, Nancy Anthracite <nanthrac...@verizon.net> wrote:
> > I have yet to see any evidence that this is a problem due to WorldVistA
> > EHR.   Do you have more folks signed on than allowed?  If not, did you
> > identify the source of the problem?

> > On Wednesday 11 February 2009, I, Valdes wrote:
> > > Say, is anyone working on this to get it fixed in the main-line
> > > WorldVistA? -- IV

> > > On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
> > > > Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
> > > > default to9999in the download WorldVistA version? This is a
> > > > particularly nasty problem and is the only one so far that briefly
> > > > rendered the system unusable. Not good when you have a patient
> > > > waiting and the system is giving you this error. -- IV

> > --
> > Nancy Anthracite

-- 
Nancy Anthracite

    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
Nancy Anthracite   	
View profile  
	 More options Feb 12, 12:39 am
From: Nancy Anthracite <nanthrac...@verizon.net>
Date: Thu, 12 Feb 2009 00:39:15 -0500
Local: Thurs, Feb 12 2009 12:39 am
Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
MAX SIGNON ALLOWED counts  system, interactive and background processes.  This
can be found by searching the documentation in the VistA Documentation
library available online.  256 might be too low depending upon what your
server is being used for.  9999 might be too high to be helpful in flagging
that there is a problem with your system.  

Do you think that with your server setup that 256 processes is excessive and
might signal there is a system problem instead of a VistA problem?  Do you
think that 9999 is too high?

On Wednesday 11 February 2009, I, Valdes wrote:

- Hide quoted text -
- Show quoted text -
> There were possibly 3 users on the system at most. If I was qualified
> to diagnose and identify the exact source of the problem I wouldn't be
> asking here. I am not the only one that has reported this problem. I
> am the only one that I know of to publish in detail exactly how you
> slap a band-aid on it. I do wonder what resources WorldVistA is
> bringing to bear to at least investigate this and hopefully fix it and
> put the fix in the main line distribution in a timely manner? I would
> fix it myself it I had the skills, knowledge and experience. I do not
> have those yet.  -- IV

> On Feb 11, 9:01 pm, Nancy Anthracite <nanthrac...@verizon.net> wrote:
> > I have yet to see any evidence that this is a problem due to WorldVistA
> > EHR.   Do you have more folks signed on than allowed?  If not, did you
> > identify the source of the problem?

> > On Wednesday 11 February 2009, I, Valdes wrote:
> > > Say, is anyone working on this to get it fixed in the main-line
> > > WorldVistA? -- IV

> > > On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
> > > > Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
> > > > default to9999in the download WorldVistA version? This is a
> > > > particularly nasty problem and is the only one so far that briefly
> > > > rendered the system unusable. Not good when you have a patient
> > > > waiting and the system is giving you this error. -- IV

> > --
> > Nancy Anthracite

-- 
Nancy Anthracite

    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
Sanchu Shanmugam   	
View profile  
	 More options Feb 12, 1:17 am
From: Sanchu Shanmugam <sanchu.shanmu...@gmail.com>
Date: Thu, 12 Feb 2009 11:47:13 +0530
Local: Thurs, Feb 12 2009 1:17 am
Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
The following should help in getting the active vs available jobs

1. Get all the Active Jobs

        W $$ACTJ^%ZOSV()

2. Get the Available Jobs

        W $$AVJ^%ZOSV()

You can manage the count based on this result.

Also, Can you please post the error message you are getting while
facing the Maximum User problem?.

You can do ^XTER - D ^XTER, for getting more details.

Regards
Sanchu S

On Thu, Feb 12, 2009 at 11:09 AM, Nancy Anthracite

- Hide quoted text -
- Show quoted text -
<nanthrac...@verizon.net> wrote:

> MAX SIGNON ALLOWED counts  system, interactive and background processes.  This
> can be found by searching the documentation in the VistA Documentation
> library available online.  256 might be too low depending upon what your
> server is being used for.  9999 might be too high to be helpful in flagging
> that there is a problem with your system.

> Do you think that with your server setup that 256 processes is excessive and
> might signal there is a system problem instead of a VistA problem?  Do you
> think that 9999 is too high?

> On Wednesday 11 February 2009, I, Valdes wrote:
>> There were possibly 3 users on the system at most. If I was qualified
>> to diagnose and identify the exact source of the problem I wouldn't be
>> asking here. I am not the only one that has reported this problem. I
>> am the only one that I know of to publish in detail exactly how you
>> slap a band-aid on it. I do wonder what resources WorldVistA is
>> bringing to bear to at least investigate this and hopefully fix it and
>> put the fix in the main line distribution in a timely manner? I would
>> fix it myself it I had the skills, knowledge and experience. I do not
>> have those yet.  -- IV

>> On Feb 11, 9:01 pm, Nancy Anthracite <nanthrac...@verizon.net> wrote:
>> > I have yet to see any evidence that this is a problem due to WorldVistA
>> > EHR.   Do you have more folks signed on than allowed?  If not, did you
>> > identify the source of the problem?

>> > On Wednesday 11 February 2009, I, Valdes wrote:
>> > > Say, is anyone working on this to get it fixed in the main-line
>> > > WorldVistA? -- IV

>> > > On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
>> > > > Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
>> > > > default to9999in the download WorldVistA version? This is a
>> > > > particularly nasty problem and is the only one so far that briefly
>> > > > rendered the system unusable. Not good when you have a patient
>> > > > waiting and the system is giving you this error. -- IV

>> > --
>> > Nancy Anthracite

> --
> Nancy Anthracite


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
Ignacio Valdes   	
View profile  
	 More options Jul 1, 10:28 am
From: Ignacio Valdes <ival...@hal-pc.org>
Date: Wed, 1 Jul 2009 10:28:08 -0500
Local: Wed, Jul 1 2009 10:28 am
Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
I am going to try to fix this problem which has gone on for a long
time now. This is the only software-caused downtime that I have had in
the past 10 months.

It appears as though for some reason the counter for this is
inaccurate. It shows a large number of signed on users/processes (like
in the 700's) when in reality there is only 8 or so. This may be due
to a missing Taskman process that clears things but I am not sure.
What program sets the count? Does anyone know if there is a process
that runs and clears this?

-- IV

- Hide quoted text -
- Show quoted text -
On Wed, Dec 17, 2008 at 4:19 PM, Ignacio Valdes<ivald...@gmail.com> wrote:
> I received the dreaded Maximum number of users already signed on to
> this processor problem as well as a Netcall see ^XTER error (not exact
> message) This totally hosed my system today for a little while without
> warning. I used the system without a problem then used it again 2
> hours later and received all these problems. My MAX SIGNON ALLOWED was
> 256 which apparently wasn't enough. I increased it to 9999 and it
> worked. Below is the terminal session for exactly how you increase
> this parameter and fix the problem:

> -- IV

> GTM>D P^DI

> VA FileMan 22.0

> Select OPTION: ?
>    Answer with OPTION NUMBER, or NAME
>   Choose from:
>   1            ENTER OR EDIT FILE ENTRIES
>   2            PRINT FILE ENTRIES
>   3            SEARCH FILE ENTRIES
>   4            MODIFY FILE ATTRIBUTES
>   5            INQUIRE TO FILE ENTRIES
>   6            UTILITY FUNCTIONS
>   7            OTHER OPTIONS
>   8            DATA DICTIONARY UTILITIES
>   9            TRANSFER ENTRIES

> Select OPTION: 1  ENTER OR EDIT FILE ENTRIES

> INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
>                                          (1 entry)
> EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
>   EDIT WHICH VOLUME SET SUB-FIELD: ALL//
> THEN EDIT FIELD:

> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
>    Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
>   1            VISTA.ICH.LOCAL

>        You may enter a new KERNEL SYSTEM PARAMETERS, if you wish

>    Answer with DOMAIN NAME
>   Choose from:
>   BETA.VISTA-OFFICE.ORG
>   FORUM.VA.GOV
>   OPENFORUM.WORLDVISTA.ORG
>   PLATINUM.VISTA-OFFICE.ORG
>   PLATINUM.VISTA.MED.VA.GOV
>   VAMHVWEB1.AAC.VA.GOV
>   VISTA.ICH.LOCAL

> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
>         ...OK? Yes//   (Yes)

> Select VOLUME SET: EHR//
>  VOLUME SET: EHR//
>  MAX SIGNON ALLOWED: 256// 9999
>  LOG SYSTEM RT?: NO//
> Select VOLUME SET:

> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:

> Select OPTION:
> GTM>h


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
Sam Habiel   	
View profile  
	 More options Jul 4, 11:35 am
From: Sam Habiel <sam.hab...@gmail.com>
Date: Sat, 4 Jul 2009 09:35:39 -0700
Local: Sat, Jul 4 2009 11:35 am
Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
Try D ^ZSY to show you processes. I hope it's installed on your
system. Otherwise, you can get it from Medsphere's integration
project.

Sam

- Hide quoted text -
- Show quoted text -
On Wed, Jul 1, 2009 at 8:28 AM, Ignacio Valdes<ival...@hal-pc.org> wrote:

> I am going to try to fix this problem which has gone on for a long
> time now. This is the only software-caused downtime that I have had in
> the past 10 months.

> It appears as though for some reason the counter for this is
> inaccurate. It shows a large number of signed on users/processes (like
> in the 700's) when in reality there is only 8 or so. This may be due
> to a missing Taskman process that clears things but I am not sure.
> What program sets the count? Does anyone know if there is a process
> that runs and clears this?

> -- IV

> On Wed, Dec 17, 2008 at 4:19 PM, Ignacio Valdes<ivald...@gmail.com> wrote:
>> I received the dreaded Maximum number of users already signed on to
>> this processor problem as well as a Netcall see ^XTER error (not exact
>> message) This totally hosed my system today for a little while without
>> warning. I used the system without a problem then used it again 2
>> hours later and received all these problems. My MAX SIGNON ALLOWED was
>> 256 which apparently wasn't enough. I increased it to 9999 and it
>> worked. Below is the terminal session for exactly how you increase
>> this parameter and fix the problem:

>> -- IV

>> GTM>D P^DI

>> VA FileMan 22.0

>> Select OPTION: ?
>>    Answer with OPTION NUMBER, or NAME
>>   Choose from:
>>   1            ENTER OR EDIT FILE ENTRIES
>>   2            PRINT FILE ENTRIES
>>   3            SEARCH FILE ENTRIES
>>   4            MODIFY FILE ATTRIBUTES
>>   5            INQUIRE TO FILE ENTRIES
>>   6            UTILITY FUNCTIONS
>>   7            OTHER OPTIONS
>>   8            DATA DICTIONARY UTILITIES
>>   9            TRANSFER ENTRIES

>> Select OPTION: 1  ENTER OR EDIT FILE ENTRIES

>> INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
>>                                          (1 entry)
>> EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
>>   EDIT WHICH VOLUME SET SUB-FIELD: ALL//
>> THEN EDIT FIELD:

>> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
>>    Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
>>   1            VISTA.ICH.LOCAL

>>        You may enter a new KERNEL SYSTEM PARAMETERS, if you wish

>>    Answer with DOMAIN NAME
>>   Choose from:
>>   BETA.VISTA-OFFICE.ORG
>>   FORUM.VA.GOV
>>   OPENFORUM.WORLDVISTA.ORG
>>   PLATINUM.VISTA-OFFICE.ORG
>>   PLATINUM.VISTA.MED.VA.GOV
>>   VAMHVWEB1.AAC.VA.GOV
>>   VISTA.ICH.LOCAL

>> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
>>         ...OK? Yes//   (Yes)

>> Select VOLUME SET: EHR//
>>  VOLUME SET: EHR//
>>  MAX SIGNON ALLOWED: 256// 9999
>>  LOG SYSTEM RT?: NO//
>> Select VOLUME SET:

>> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:

>> Select OPTION:
>> GTM>h


    Reply to author    Forward       
Report spam
Reporting spam
Message reported
    Rate this post: Text for clearing space
		
		
		
You must Sign in before you can post messages.
To post a message you must first join this group.
Please update your nickname on the subscription settings page before posting.
You do not have the permission required to post.
	
		
Bhaskar, KS   	
View profile  
	 More options Jul 4, 2:05 pm
From: "Bhaskar, KS" <KS.Bhas...@fnis.com>
Date: Sat, 4 Jul 2009 14:05:55 -0500
Local: Sat, Jul 4 2009 2:05 pm
Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author

If you know the global variable that counts number of users, mupip journal extract on that variable from the journal files may be informative.

Regards
-- Bhaskar

Difference between revisions of "Ignacio Valdes Implementation Log/Episode37"

Latest revision as of 04:56, 13 November 2020

Navigation menu

Views

Personal tools

Navigation

Search

Tools

@@ Line 1: / Line 1: @@
-Summary: These are the essential menus for how to define a ward, add
+[[Ignacio_Valdes_Implementation_Log]]
-beds, admit and discharge a patient so it shows where they are via the
+<pre>
-Patient Inquiry report(click on the patient name button in CPRS)  and
-do the Gains and Losses reports. Biggest trick is you have to enter a
-G&L number when defining a ward and this is simply a place holder like
-, 10, 15, etc.
-DG SYSTEM DEFINITION MENU-->Ward Definition Entry/Edit
+'''''Update 8/28/2011:''''' If your system is locked up, you have to up the MAX SIGNON ALLOWED as below. After that to prevent it from happening again you run XUS PROCESS COUNT CLEANUP and have Taskman run XUS PROCESS COUNT CLEANUP periodically. Sam says every hour.
-DG SYSTEM DEFINITION MENU-->Add/Edit Beds
-DG Admit Patient
-DG Discharge Patient
-DG G&     (This gets you the Gains and Losses menu items)
-Terminal session for various things you need to do to get a G&L report
+I received the dreaded Maximum number of users already signed on to
-going with a daily run. There is a DG G&L Recalc for doing this now.
+this processor problem as well as a Netcall see ^XTER error (not exact
-Biggest aha is 1D as a parameter (see below) will get you a daily
+message) This totally hosed my system today for a little while without
-automatic run. This also shows how to list scheduled tasks so that you
+warning. I used the system without a problem then used it again 2
-can see what is enqueued and finally shows the first report which does
+hours later and received all these problems. My MAX SIGNON ALLOWED was
-not show much.
+which apparently wasn't enough. I increased it to 9999 and it
+worked. Below is the terminal session for exactly how you increase
+this parameter and fix the problem:
-GTM>S DUZ=60 D ^XUP
+-- IV
-Setting up programmer environment
-This is a TEST account.
-Terminal Type set to: C-VT100
-Select OPTION NAME: DG G
-   DG G&L CHANGES VIEW       View G&L Corrections
-   DG G&L INIT       Gains and Losses Initialization
-   DG G&L RECALC       Recalculate G&L Cumulative Totals
-   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
-Statistics
-   DG G&L SHEET       Gains and Losses (G&L) Sheet
-Press <RETURN> to see more, '^' to exit this list, OR
-CHOOSE 1-5: 4  DG G&L RECALCULATION AUTO     Auto-recalculation of G&L
-Statistic
-s
-Auto-recalculation of G&L Statistics
-GTM>
 GTM>D P^DI
@@ Line 57: / Line 32: @@
             TRANSFER ENTRIES
-Select OPTION: 5  INQUIRE TO FILE ENTRIES
+Select OPTION: 1  ENTER OR EDIT FILE ENTRIES
-OUTPUT FROM WHAT FILE: PATIENT// 19.2  OPTION SCHEDULING
+INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
-                                           (20 entries)
+                                           (1 entry)
-Select OPTION SCHEDULING NAME: DG G&L RECALCULATION AUTO       Auto-
+EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
-recalculatio
+   EDIT WHICH VOLUME SET SUB-FIELD: ALL//
-n of G&L Statistics
+THEN EDIT FIELD:
-ANOTHER ONE:
-STANDARD CAPTIONED OUTPUT? Yes//   (Yes)
-Include COMPUTED fields:  (N/Y/R/B): NO// BOTH Computed Fields and
-Record Number
- (IEN)
-NUMBER: 29                              NAME: DG G&L RECALCULATION
+Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
-AUTO
+    Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
-  QUEUED TO RUN AT WHAT TIME: AUG 21, 2008@21:00
+           VISTA.ICH.LOCAL
-  TASK ID: 157
-  TASK DEFIND (c): 1
-Select OPTION SCHEDULING NAME:
+        You may enter a new KERNEL SYSTEM PARAMETERS, if you wish
-Select OPTION: E  NTER OR EDIT FILE ENTRIES
+    Answer with DOMAIN NAME
+   Choose from:
+   BETA.VISTA-OFFICE.ORG
+   FORUM.VA.GOV
+   OPENFORUM.WORLDVISTA.ORG
+   PLATINUM.VISTA-OFFICE.ORG
+   PLATINUM.VISTA.MED.VA.GOV
+   VAMHVWEB1.AAC.VA.GOV
+   VISTA.ICH.LOCAL
-INPUT TO WHAT FILE: OPTION SCHEDULING//
+Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
-EDIT WHICH FIELD: ALL//
+         ...OK? Yes//   (Yes)
-Select OPTION SCHEDULING NAME:    DG G&L RECALCULATION AUTO
+Select VOLUME SET: EHR//
-NAME: DG G&L RECALCULATION AUTO//
+  VOLUME SET: EHR//
-QUEUED TO RUN AT WHAT TIME: AUG 21,2008@21:00// T@2355  (DEC 15,
+  MAX SIGNON ALLOWED: 256// 9999
-@23:55)
+  LOG SYSTEM RT?: NO//
-DEVICE FOR QUEUED JOB OUTPUT:
+Select VOLUME SET:
-OTHER DEVICE PARAMETERS:
-QUEUED TO RUN ON VOLUME SET:
-RESCHEDULING FREQUENCY: 1D
-SPECIAL QUEUEING:
-Select VARIABLE NAME:
-USER TO RUN TASK:
-TASK ID: 245948//
-TASK PARAMETERS:
-Select OPTION SCHEDULING NAME:
+Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:
 Select OPTION:
-GTM>D ^XUP
+GTM>h
-Setting up programmer environment
+    Reply to author    Forward
-This is a TEST account.
+Report spam
+Reporting spam
+Message reported
+    Rate this post:
+Cancel
+Send  Discard
+From:
+ivaldes1@gmail.com <ivaldes1@gmail.com>
+To:
+Cc:
+Followup To:
+Add Cc | Add Followup-to | Edit Subject
+Subject:
+Validation:
+For [[verification~|Verification]] purposes please type the characters you see in the picture below or the numbers you hear by clicking the accessibility icon. Listen and type the numbers you hear
+Send  Discard
+You must Sign in before you can post messages.
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+I, Valdes
+View profile
+	 More options Dec 17 2008, 4:32 pm
+From: "I, Valdes" <ival...@hal-pc.org>
+Date: Wed, 17 Dec 2008 13:32:30 -0800 (PST)
+Local: Wed, Dec 17 2008 4:32 pm
+Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
+The CPRS error message for this was Error encountered. Function was:
+NetCall Error was: M Error - Use ^XTER
-Terminal Type set to: C-VT100
+On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
-Select OPTION NAME: EVE
+- Hide quoted text -
-   EVE       Systems Manager Menu
+- Show quoted text -
-   EVENT CAPTURE (ECS) EXTRACT AU  ECX ECS SOURCE AUDIT
+> I received the dreaded Maximum number of users already signed on to
-Event Capture
+> this processor problem as well as a Netcall see ^XTER error (not exact
-(ECS) Extract Audit
+> message) This totally hosed my system today for a little while without
-   EVENT CAPTURE DATA ENTRY  ECENTER     Event Capture Data
+> warning. I used the system without a problem then used it again 2
-Entry
+> hours later and received all these problems. My MAX SIGNON ALLOWED was
-   EVENT CAPTURE EXTRACT  ECXEC     Event Capture Extract
+> 256 which apparently wasn't enough. I increased it to 9999 and it
-   EVENT CAPTURE MANAGEMENT MENU  ECMGR     Event Capture
+> worked. Below is the terminal session for exactly how you increase
-Management Menu
+> this parameter and fix the problem:
-Press <RETURN> to see more, '^' to exit this list, OR
-CHOOSE 1-5: 1  EVE     Systems Manager Menu
-          Core Applications ...
+> -- IV
-          Device Management ...
-          Menu Management ...
-          Programmer Options ...
-          Operations Management ...
-          Spool Management ...
-          Information Security Officer Menu ...
-          Taskman Management ...
-          User Management ...
-   FM     VA FileMan ...
-          Application Utilities ...
-          Capacity Planning ...
-          HL7 Main Menu ...
-          Manage Mailman ...
-          MAS Parameter Entry/Edit
-You have PENDING ALERTS
+> GTM>D P^DI
-          Enter  "VA to jump to VIEW ALERTS option
-Select Systems Manager Menu Option: Taskman Management
+> VA FileMan 22.0
-          Schedule/Unschedule Options
+> Select OPTION: ?
-          One-time Option Queue
+>     Answer with OPTION NUMBER, or NAME
-          Taskman Management Utilities ...
+>    Choose from:
-          List Tasks
+>    1            ENTER OR EDIT FILE ENTRIES
-          Dequeue Tasks
+>    2            PRINT FILE ENTRIES
-          Requeue Tasks
+>    3            SEARCH FILE ENTRIES
-          Delete Tasks
+>    4            MODIFY FILE ATTRIBUTES
-          Print Options that are Scheduled to run
+>    5            INQUIRE TO FILE ENTRIES
-          Cleanup Task List
+>    6            UTILITY FUNCTIONS
-          Print Options Recommended for Queueing
+>    7            OTHER OPTIONS
+>    8            DATA DICTIONARY UTILITIES
+>    9            TRANSFER ENTRIES
-You have PENDING ALERTS
+> Select OPTION: 1  ENTER OR EDIT FILE ENTRIES
-          Enter  "VA to jump to VIEW ALERTS option
-Select Taskman Management Option: List Tasks
+> INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
+>                                           (1 entry)
+> EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
+>    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
+> THEN EDIT FIELD:
-                    List Tasks Option
+> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
+>     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
+>    1            VISTA.ICH.LOCAL
-                         All your tasks.
+>         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish
-                         Your future tasks.
-                         Every task.
-                         List of tasks.
-                         Unsuccessful tasks.
-                         Future tasks.
-                         Running tasks.
-                    Select Type Of Listing: Future tasks.
+>     Answer with DOMAIN NAME
+>    Choose from:
+>    BETA.VISTA-OFFICE.ORG
+>    FORUM.VA.GOV
+>    OPENFORUM.WORLDVISTA.ORG
+>    PLATINUM.VISTA-OFFICE.ORG
+>    PLATINUM.VISTA.MED.VA.GOV
+>    VAMHVWEB1.AAC.VA.GOV
+>    VISTA.ICH.LOCAL
-Building sorted list of tasks...finished!
+> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
-DEVICE: HOME//   TELNET
+>          ...OK? Yes//   (Yes)
-Task list  Dec 15, 2008 4:48 pm                                Page 1
--------------------------------------------------------------------------------
-: DG G&L RECALCULATION AUTO - Auto-recalculation of G&L
-Statistics.
-        No device.  EHR,EHR.  From Today at 16:46,  By you.
-        Scheduled for Today at 23:55
-Enter RETURN to continue or '^' to exit:
-                    List Tasks Option
+> Select VOLUME SET: EHR//
+>   VOLUME SET: EHR//
+>   MAX SIGNON ALLOWED: 256// 9999
+>   LOG SYSTEM RT?: NO//
+> Select VOLUME SET:
-                         All your tasks.
+> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:
-                         Your future tasks.
-                         Every task.
-                         List of tasks.
-                         Unsuccessful tasks.
-                         Future tasks.
-                         Running tasks.
-                    Select Type Of Listing:
+> Select OPTION:
+> GTM>h
-          Schedule/Unschedule Options
-          One-time Option Queue
-          Taskman Management Utilities ...
-          List Tasks
-          Dequeue Tasks
-          Requeue Tasks
-          Delete Tasks
-          Print Options that are Scheduled to run
-          Cleanup Task List
-          Print Options Recommended for Queueing
-You have PENDING ALERTS
+    Reply to author    Forward
-          Enter  "VA to jump to VIEW ALERTS option
+Report spam
+Reporting spam
+Message reported
+    Rate this post: Text for clearing space
+You must Sign in before you can post messages.
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+Greg Woodhouse
+View profile
+	 More options Dec 17 2008, 4:45 pm
+From: "Greg Woodhouse" <gregory.woodho...@gmail.com>
+Date: Wed, 17 Dec 2008 13:45:28 -0800
+Local: Wed, Dec 17 2008 4:45 pm
+Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
-Select Taskman Management Option:
+In most cases, this means the peer process (i.e., the one on the MUMPS side)
+terminated abnormally due to an error, and the connection was lost. You can
+either review the error log through the menu system or (as is more common)
+with D ^XTER. This will allow you to see what the error was, what the
+process environment lookeed like (i.e., get a dump of the symbol table) and
+stack trace. This information can be invaluable in tracking down problems.
+It may seem overwhelming at first, but an experienced developer can often
+see the problem in minutes or seconds this way. Of course, fixing it may be
+another matter. :)
-          Core Applications ...
+- Hide quoted text -
-          Device Management ...
+- Show quoted text -
-          Menu Management ...
+On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org> wrote:
-          Programmer Options ...
-          Operations Management ...
-          Spool Management ...
-          Information Security Officer Menu ...
-          Taskman Management ...
-          User Management ...
-   FM     VA FileMan ...
-          Application Utilities ...
-          Capacity Planning ...
-          HL7 Main Menu ...
-          Manage Mailman ...
-          MAS Parameter Entry/Edit
-You have PENDING ALERTS
+> The CPRS error message for this was Error encountered. Function was:
-          Enter  "VA to jump to VIEW ALERTS option
+> NetCall Error was: M Error - Use ^XTER
-Select Systems Manager Menu Option:
+> On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+> > I received the dreaded Maximum number of users already signed on to
+> > this processor problem as well as a Netcall see ^XTER error (not exact
+> > message) This totally hosed my system today for a little while without
+> > warning. I used the system without a problem then used it again 2
+> > hours later and received all these problems. My MAX SIGNON ALLOWED was
+> > 256 which apparently wasn't enough. I increased it to 9999 and it
+> > worked. Below is the terminal session for exactly how you increase
+> > this parameter and fix the problem:
-Do you really want to halt? YES//
+> > -- IV
-Logged out at Dec 15, 2008 4:48 pm
+> > GTM>D P^DI
-GTM>%GTM-I-CTRLC, CTRL_C encountered
-GTM>D ^XUP
+> > VA FileMan 22.0
-Setting up programmer environment
+> > Select OPTION: ?
-This is a TEST account.
+> >     Answer with OPTION NUMBER, or NAME
+> >    Choose from:
+> >    1            ENTER OR EDIT FILE ENTRIES
+> >    2            PRINT FILE ENTRIES
+> >    3            SEARCH FILE ENTRIES
+> >    4            MODIFY FILE ATTRIBUTES
+> >    5            INQUIRE TO FILE ENTRIES
+> >    6            UTILITY FUNCTIONS
+> >    7            OTHER OPTIONS
+> >    8            DATA DICTIONARY UTILITIES
+> >    9            TRANSFER ENTRIES
-Terminal Type set to: C-VT100
+> > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES
-Select OPTION NAME: DG G&
+> > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
-  DG G&L CHANGES VIEW       View G&L Corrections
+> >                                           (1 entry)
-   DG G&L INIT       Gains and Losses Initialization
+> > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
-   DG G&L RECALC       Recalculate G&L Cumulative Totals
+> >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
-   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
+> > THEN EDIT FIELD:
-Statistics
-   DG G&L SHEET       Gains and Losses (G&L) Sheet
-CHOOSE 1-5: 5  DG G&L SHEET     Gains and Losses (G&L) Sheet
-Gains and Losses (G&L) Sheet
-<<<GAINS & LOSSES SHEET/BED STATUS REPORT/TREATING SPECIALTY REPORT>>>
+> > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
+> >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
+> >    1            VISTA.ICH.LOCAL
-Earliest Date for G&L.....................................NOV 30,2004
+> >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish
-Earliest Date for Treating Specialty Report...............NOT DEFINED
-Earliest Date to Recalculate..............................NOV 30,2004
-SSN Format................................................ENTIRE SSN
-Means Test Copay Applicability............................NOT
-DISPLAYED
-Patient's Actual Treating Specialty.......................NOT
-DISPLAYED
-Show Non-Movements on G&L.................................SHOW
-Store Vietnam Vet's Remaining in CENSUS file..............YES
-Store Patient's over 65 y/o Remaining in CENSUS file......YES
-PRINT GAINS AND LOSSES SHEET? Yes//   (Yes)
+> >     Answer with DOMAIN NAME
+> >    Choose from:
+> >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/>
+> >    FORUM.VA.GOV <http://forum.va.gov/>
+> >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/>
+> >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/>
+> >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/>
+> >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/>
+> >    VISTA.ICH.LOCAL
-PRINT BED STATUS REPORT? Yes//   (Yes)
+> > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
+> >          ...OK? Yes//   (Yes)
-TREATING SPECIALTY REPORT WILL NOT BE GENERATED UNTIL THE
+> > Select VOLUME SET: EHR//
-TSR INITIALIZATION DATE IS DEFINED
+> >   VOLUME SET: EHR//
+> >   MAX SIGNON ALLOWED: 256// 9999
+> >   LOG SYSTEM RT?: NO//
+> > Select VOLUME SET:
-TREATING SPECIALTY REPORT WILL NOT BE GENERATED UNTIL THE
+> > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:
-RECALCULATION IS PERFORMED BACK TO THE TSR INITIALIZATION DATE
-LAST BED STATUS REPORT TOTALS EXIST FOR DEC 14,2008
+> > Select OPTION:
+> > GTM>h
-PRINT REPORTS FOR WHICH DATE: DEC 14,2008//   (DEC 14, 2008)
-SITE: INTRACARE South WHAT WAS THE CENSUS ON DEC 14, 2008?
+     Reply to author    Forward
-     Enter a WHOLE NUMBER without fractions or '0' or up-arrow ["^"] to
+Report spam
-QUIT!!
+Reporting spam
- WHAT WAS THE CENSUS ON DEC 14, 2008? 1
+Message reported
-    Enter a WHOLE NUMBER without fractions or '0' or up-arrow ["^"] to
+     Rate this post: Text for clearing space
-QUIT!!
- WHAT WAS THE CENSUS ON DEC 14, 2008? 1
-    Enter a WHOLE NUMBER without fractions or '0' or up-arrow ["^"] to
-QUIT!!
- WHAT WAS THE CENSUS ON DEC 14, 2008? ?
-     Enter a WHOLE NUMBER without fractions or '0' or up-arrow ["^"] to
-QUIT!!
- WHAT WAS THE CENSUS ON DEC 14, 2008? 0
-CUM PLANNED ADC: ?
-     Enter the cumulative planned ADC for the medical center, 0-2999.
-CUM PLANNED ADC:
-MONTHLY PLANNED ADC:
-CORRECTIONS TO PREVIOUS G&L'S:
-  No existing text
-  Edit? NO//
-Recalculate BSR Totals? No//   (No)
-Note: This output should be printed at a column width of 132.
-DEVICE: HOME//   TELNET
-Date/Time ...
-read more »
-    Reply to author    Forward
@@ Line 321: / Line 309: @@
 I, Valdes
 View profile
-	 More options Dec 15 2008, 6:09 pm
+	 More options Dec 17 2008, 5:02 pm
 From: "I, Valdes" <ival...@hal-pc.org>
-Date: Mon, 15 Dec 2008 15:09:50 -0800 (PST)
+Date: Wed, 17 Dec 2008 14:02:00 -0800 (PST)
-Local: Mon, Dec 15 2008 6:09 pm
+Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
-Subject: Re: Intracare Implementation Log Episode 36: Patient movement and tracking? SUMMARY
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
-Reply to author | Forward | Print | Individual message | Show original | Remove | Report this message | Find messages by this author
+Thanks Greg, in this case, reviewing the error log revealed nothing as
-Also, DG Bed Availability is a helpful command that shows beds
+no error was logged. The system just goes kerplunk and stayed there
-available. You can assign more than one Ward to a bed. -- IV
+without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256.
+It has been running for months without problems.
-On Dec 15, 5:05 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+-- IV
+On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
+wrote:
 - Hide quoted text -
 - Show quoted text -
-> Summary: These are the essential menus for how to define a ward, add
+> In most cases, this means the peer process (i.e., the one on the MUMPS side)
-> beds, admit and discharge a patient so it shows where they are via the
+> terminated abnormally due to an error, and the connection was lost. You can
-> Patient Inquiry report(click on the patient name button in CPRS)  and
+> either review the error log through the menu system or (as is more common)
-> do the Gains and Losses reports. Biggest trick is you have to enter a
+> with D ^XTER. This will allow you to see what the error was, what the
-> G&L number when defining a ward and this is simply a place holder like
+> process environment lookeed like (i.e., get a dump of the symbol table) and
-> 5, 10, 15, etc.
+> stack trace. This information can be invaluable in tracking down problems.
+> It may seem overwhelming at first, but an experienced developer can often
+> see the problem in minutes or seconds this way. Of course, fixing it may be
+> another matter. :)
-> DG SYSTEM DEFINITION MENU-->Ward Definition Entry/Edit
+> On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org> wrote:
-> DG SYSTEM DEFINITION MENU-->Add/Edit Beds
-> DG Admit Patient
-> DG Discharge Patient
-> DG G&     (This gets you the Gains and Losses menu items)
-> Terminal session for various things you need to do to get a G&L report
+> > The CPRS error message for this was Error encountered. Function was:
-> going with a daily run. There is a DG G&L Recalc for doing this now.
+> > NetCall Error was: M Error - Use ^XTER
-> Biggest aha is 1D as a parameter (see below) will get you a daily
-> automatic run. This also shows how to list scheduled tasks so that you
-> can see what is enqueued and finally shows the first report which does
-> not show much.
-> GTM>S DUZ=60 D ^XUP
+> > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+> > > I received the dreaded Maximum number of users already signed on to
+> > > this processor problem as well as a Netcall see ^XTER error (not exact
+> > > message) This totally hosed my system today for a little while without
+> > > warning. I used the system without a problem then used it again 2
+> > > hours later and received all these problems. My MAX SIGNON ALLOWED was
+> > > 256 which apparently wasn't enough. I increased it to 9999 and it
+> > > worked. Below is the terminal session for exactly how you increase
+> > > this parameter and fix the problem:
-> Setting up programmer environment
+> > > -- IV
-> This is a TEST account.
-> Terminal Type set to: C-VT100
+> > > GTM>D P^DI
-> Select OPTION NAME: DG G
+> > > VA FileMan 22.0
->      1   DG G&L CHANGES VIEW       View G&L Corrections
->      2   DG G&L INIT       Gains and Losses Initialization
->      3   DG G&L RECALC       Recalculate G&L Cumulative Totals
->      4   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
-> Statistics
->      5   DG G&L SHEET       Gains and Losses (G&L) Sheet
-> Press <RETURN> to see more, '^' to exit this list, OR
-> CHOOSE 1-5: 4  DG G&L RECALCULATION AUTO     Auto-recalculation of G&L
-> Statistic
-> s
-> Auto-recalculation of G&L Statistics
-> GTM>
-> GTM>D P^DI
+> > > Select OPTION: ?
+> > >     Answer with OPTION NUMBER, or NAME
+> > >    Choose from:
+> > >    1            ENTER OR EDIT FILE ENTRIES
+> > >    2            PRINT FILE ENTRIES
+> > >    3            SEARCH FILE ENTRIES
+> > >    4            MODIFY FILE ATTRIBUTES
+> > >    5            INQUIRE TO FILE ENTRIES
+> > >    6            UTILITY FUNCTIONS
+> > >    7            OTHER OPTIONS
+> > >    8            DATA DICTIONARY UTILITIES
+> > >    9            TRANSFER ENTRIES
-> VA FileMan 22.0
+> > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES
-> Select OPTION: ?
+> > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
->     Answer with OPTION NUMBER, or NAME
+> > >                                           (1 entry)
->    Choose from:
+> > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
->    1            ENTER OR EDIT FILE ENTRIES
+> > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
->    2            PRINT FILE ENTRIES
+> > > THEN EDIT FIELD:
->    3            SEARCH FILE ENTRIES
->    4            MODIFY FILE ATTRIBUTES
->    5            INQUIRE TO FILE ENTRIES
->    6            UTILITY FUNCTIONS
->    7            OTHER OPTIONS
->    8            DATA DICTIONARY UTILITIES
->    9            TRANSFER ENTRIES
-> Select OPTION: 5  INQUIRE TO FILE ENTRIES
+> > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
+> > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
+> > >    1            VISTA.ICH.LOCAL
-> OUTPUT FROM WHAT FILE: PATIENT// 19.2  OPTION SCHEDULING
+> > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish
->                                           (20 entries)
-> Select OPTION SCHEDULING NAME: DG G&L RECALCULATION AUTO       Auto-
-> recalculatio
-> n of G&L Statistics
-> ANOTHER ONE:
-> STANDARD CAPTIONED OUTPUT? Yes//   (Yes)
-> Include COMPUTED fields:  (N/Y/R/B): NO// BOTH Computed Fields and
-> Record Number
->  (IEN)
-> NUMBER: 29                              NAME: DG G&L RECALCULATION
+> > >     Answer with DOMAIN NAME
-> AUTO
+> > >    Choose from:
->   QUEUED TO RUN AT WHAT TIME: AUG 21, 2008@21:00
+> > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/>
->   TASK ID: 157
+> > >    FORUM.VA.GOV <http://forum.va.gov/>
->   TASK DEFIND (c): 1
+> > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/>
+> > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/>
+> > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/>
+> > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/>
+> > >    VISTA.ICH.LOCAL
-> Select OPTION SCHEDULING NAME:
+> > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
+> > >          ...OK? Yes//   (Yes)
-> Select OPTION: E  NTER OR EDIT FILE ENTRIES
+> > > Select VOLUME SET: EHR//
+> > >   VOLUME SET: EHR//
+> > >   MAX SIGNON ALLOWED: 256// 9999
+> > >   LOG SYSTEM RT?: NO//
+> > > Select VOLUME SET:
-> INPUT TO WHAT FILE: OPTION SCHEDULING//
+> > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:
-> EDIT WHICH FIELD: ALL//
-> Select OPTION SCHEDULING NAME:    DG G&L RECALCULATION AUTO
+> > > Select OPTION:
-> NAME: DG G&L RECALCULATION AUTO//
+> > > GTM>h
-> QUEUED TO RUN AT WHAT TIME: AUG 21,2008@21:00// T@2355  (DEC 15,
-> 2008@23:55)
-> DEVICE FOR QUEUED JOB OUTPUT:
-> OTHER DEVICE PARAMETERS:
-> QUEUED TO RUN ON VOLUME SET:
-> RESCHEDULING FREQUENCY: 1D
-> SPECIAL QUEUEING:
-> Select VARIABLE NAME:
-> USER TO RUN TASK:
-> TASK ID: 245948//
-> TASK PARAMETERS:
-> Select OPTION SCHEDULING NAME:
-> Select OPTION:
+    Reply to author    Forward
-> GTM>D ^XUP
+Report spam
+Reporting spam
+Message reported
+    Rate this post: Text for clearing space
+You must Sign in before you can post messages.
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+Greg Woodhouse
+View profile
+Okay, that makes sense. Even if the process terminates *normally* through QUIT, the connection will still be lost. Are you not able to increase the maximum number of users? - Hide quoted text -- Show quoted text -On Wed, Dec 17, 2008 at 2:02 PM, I, Valdes <ival...@hal-pc.org> wrote: > Thanks Greg, in this case, reviewing the error log revealed nothing as > no error was logged. The system just goes kerplunk and stayed there > without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256. > It has been running for months without problems. > -- IV > On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com> > wrote: > > In most cases, this means the peer process (i.e., the one on the MUMPS > side) > > terminated abnormally due to an error, and the connection was lost. You > can > > either review the error log through the menu system or (as is more > common) > > with D ^XTER. This will allow you to see what the error was, what the > > process environment lookeed like (i.e., get a dump of the symbol table) > and > > stack trace. This information can be invaluable in tracking down > problems. > > It may seem overwhelming at first, but an experienced developer can often > > see the problem in minutes or seconds this way. Of course, fixing it may > be > > another matter. :) >  > On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org> wrote: > > > The CPRS error message for this was Error encountered. Function was: > > > NetCall Error was: M Error - Use ^XTER > > > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote: > > > > I received the dreaded Maximum number of users already signed on to > > > > this processor problem as well as a Netcall see ^XTER error (not > exact > > > > message) This totally hosed my system today for a little while > without > > > > warning. I used the system without a problem then used it again 2 > > > > hours later and received all these problems. My MAX SIGNON ALLOWED > was > > > > 256 which apparently wasn't enough. I increased it to 9999 and it > > > > worked. Below is the terminal session for exactly how you increase > > > > this parameter and fix the problem: > > > > -- IV > > > > GTM>D P^DI > > > > VA FileMan 22.0 > > > > Select OPTION: ? > > > >     Answer with OPTION NUMBER, or NAME > > > >    Choose from: > > > >    1            ENTER OR EDIT FILE ENTRIES > > > >    2            PRINT FILE ENTRIES > > > >    3            SEARCH FILE ENTRIES > > > >    4            MODIFY FILE ATTRIBUTES > > > >    5            INQUIRE TO FILE ENTRIES > > > >    6            UTILITY FUNCTIONS > > > >    7            OTHER OPTIONS > > > >    8            DATA DICTIONARY UTILITIES > > > >    9            TRANSFER ENTRIES > > > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES > > > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS > > > >                                           (1 entry) > > > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple) > > > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL// > > > > THEN EDIT FIELD: > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ? > > > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME: > > > >    1            VISTA.ICH.LOCAL > > > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish > > > >     Answer with DOMAIN NAME > > > >    Choose from: > > > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/> < > http://beta.vista-office.org/> > > > >    FORUM.VA.GOV <http://forum.va.gov/> <http://forum.va.gov/> > > > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/> < > http://openforum.worldvista.org/> > > > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/> < > http://platinum.vista-office.org/> > > > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/> < > http://platinum.vista.med.va.gov/> > > > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/> < > http://vamhvweb1.aac.va.gov/> >  > > >    VISTA.ICH.LOCAL > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL > > > >          ...OK? Yes//   (Yes) > > > > Select VOLUME SET: EHR// > > > >   VOLUME SET: EHR// > > > >   MAX SIGNON ALLOWED: 256// 9999 > > > >   LOG SYSTEM RT?: NO// > > > > Select VOLUME SET: > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: > > > > Select OPTION: > > > > GTM>h
+	 More options Dec 17 2008, 5:12 pm
+From: "Greg Woodhouse" <gregory.woodho...@gmail.com>
+Date: Wed, 17 Dec 2008 14:12:41 -0800
+Local: Wed, Dec 17 2008 5:12 pm
+Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
-> Setting up programmer environment
+Okay, that makes sense. Even if the process terminates *normally* through
-> This is a TEST account.
+QUIT, the connection will still be lost.
-> Terminal Type set to: C-VT100
+Are you not able to increase the maximum number of users?
-> Select OPTION NAME: EVE
+- Hide quoted text -
->      1   EVE       Systems Manager Menu
+- Show quoted text -
->      2   EVENT CAPTURE (ECS) EXTRACT AU  ECX ECS SOURCE AUDIT
+On Wed, Dec 17, 2008 at 2:02 PM, I, Valdes <ival...@hal-pc.org> wrote:
-> Event Capture
-> (ECS) Extract Audit
->      3   EVENT CAPTURE DATA ENTRY  ECENTER     Event Capture Data
-> Entry
->      4   EVENT CAPTURE EXTRACT  ECXEC     Event Capture Extract
->      5   EVENT CAPTURE MANAGEMENT MENU  ECMGR     Event Capture
-> Management Menu
-> Press <RETURN> to see more, '^' to exit this list, OR
-> CHOOSE 1-5: 1  EVE     Systems Manager Menu
->           Core Applications ...
+> Thanks Greg, in this case, reviewing the error log revealed nothing as
->           Device Management ...
+> no error was logged. The system just goes kerplunk and stayed there
->           Menu Management ...
+> without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256.
->           Programmer Options ...
+> It has been running for months without problems.
->           Operations Management ...
->           Spool Management ...
->           Information Security Officer Menu ...
->           Taskman Management ...
->           User Management ...
->    FM     VA FileMan ...
->           Application Utilities ...
->           Capacity Planning ...
->           HL7 Main Menu ...
->           Manage Mailman ...
->           MAS Parameter Entry/Edit
-> You have PENDING ALERTS
+> -- IV
->           Enter  "VA to jump to VIEW ALERTS option
-> Select Systems Manager Menu Option: Taskman Management
+> On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
+> wrote:
+> > In most cases, this means the peer process (i.e., the one on the MUMPS
+> side)
+> > terminated abnormally due to an error, and the connection was lost. You
+> can
+> > either review the error log through the menu system or (as is more
+> common)
+> > with D ^XTER. This will allow you to see what the error was, what the
+> > process environment lookeed like (i.e., get a dump of the symbol table)
+> and
+> > stack trace. This information can be invaluable in tracking down
+> problems.
+> > It may seem overwhelming at first, but an experienced developer can often
+> > see the problem in minutes or seconds this way. Of course, fixing it may
+> be
+> > another matter. :)
->           Schedule/Unschedule Options
+>  > On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org> wrote:
->           One-time Option Queue
->           Taskman Management Utilities ...
->           List Tasks
->           Dequeue Tasks
->           Requeue Tasks
->           Delete Tasks
->           Print Options that are Scheduled to run
->           Cleanup Task List
->           Print Options Recommended for Queueing
-> You have PENDING ALERTS
+> > > The CPRS error message for this was Error encountered. Function was:
->           Enter  "VA to jump to VIEW ALERTS option
+> > > NetCall Error was: M Error - Use ^XTER
-> Select Taskman Management Option: List Tasks
+> > > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+> > > > I received the dreaded Maximum number of users already signed on to
+> > > > this processor problem as well as a Netcall see ^XTER error (not
+> exact
+> > > > message) This totally hosed my system today for a little while
+> without
+> > > > warning. I used the system without a problem then used it again 2
+> > > > hours later and received all these problems. My MAX SIGNON ALLOWED
+> was
+> > > > 256 which apparently wasn't enough. I increased it to 9999 and it
+> > > > worked. Below is the terminal session for exactly how you increase
+> > > > this parameter and fix the problem:
->                     List Tasks Option
+> > > > -- IV
->                          All your tasks.
+> > > > GTM>D P^DI
->                          Your future tasks.
->                          Every task.
->                          List of tasks.
->                          Unsuccessful tasks.
->                          Future tasks.
->                          Running tasks.
->                     Select Type Of Listing: Future tasks.
+> > > > VA FileMan 22.0
-> Building sorted list of tasks...finished!
+> > > > Select OPTION: ?
-> DEVICE: HOME//   TELNET
+> > > >     Answer with OPTION NUMBER, or NAME
-> Task list  Dec 15, 2008 4:48 pm                                Page 1
+> > > >    Choose from:
-> -------------------------------------------------------------------------------
+> > > >    1            ENTER OR EDIT FILE ENTRIES
-> 245948: DG G&L RECALCULATION AUTO - Auto-recalculation of G&L
+> > > >    2            PRINT FILE ENTRIES
-> Statistics.
+> > > >    3            SEARCH FILE ENTRIES
->         No device.  EHR,EHR.  From Today at 16:46,  By you.
+> > > >    4            MODIFY FILE ATTRIBUTES
->         Scheduled for Today at 23:55
+> > > >    5            INQUIRE TO FILE ENTRIES
-> Enter RETURN to continue or '^' to exit:
+> > > >    6            UTILITY FUNCTIONS
+> > > >    7            OTHER OPTIONS
+> > > >    8            DATA DICTIONARY UTILITIES
+> > > >    9            TRANSFER ENTRIES
->                     List Tasks Option
+> > > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES
->                          All your tasks.
+> > > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
->                          Your future tasks.
+> > > >                                           (1 entry)
->                          Every task.
+> > > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
->                          List of tasks.
+> > > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
->                          Unsuccessful tasks.
+> > > > THEN EDIT FIELD:
->                          Future tasks.
->                          Running tasks.
->                     Select Type Of Listing:
+> > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
+> > > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
+> > > >    1            VISTA.ICH.LOCAL
->           Schedule/Unschedule Options
+> > > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish
->           One-time Option Queue
->           Taskman Management Utilities ...
->           List Tasks
->           Dequeue Tasks
->           Requeue Tasks
->           Delete Tasks
->           Print Options that are Scheduled to run
->           Cleanup Task List
->           Print Options Recommended for Queueing
-> You have PENDING ALERTS
+> > > >     Answer with DOMAIN NAME
->           Enter  "VA to jump to VIEW ALERTS option
+> > > >    Choose from:
+> > > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/> <
+> http://beta.vista-office.org/>
+> > > >    FORUM.VA.GOV <http://forum.va.gov/> <http://forum.va.gov/>
+> > > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/> <
+> http://openforum.worldvista.org/>
+> > > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/> <
+> http://platinum.vista-office.org/>
+> > > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/> <
+> http://platinum.vista.med.va.gov/>
+> > > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/> <
+> http://vamhvweb1.aac.va.gov/>
+>  > > >    VISTA.ICH.LOCAL
-> Select Taskman Management Option:
+> > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
+> > > >          ...OK? Yes//   (Yes)
->           Core Applications ...
+> > > > Select VOLUME SET: EHR//
->           Device Management ...
+> > > >   VOLUME SET: EHR//
->           Menu Management ...
+> > > >   MAX SIGNON ALLOWED: 256// 9999
->           Programmer Options ...
+> > > >   LOG SYSTEM RT?: NO//
->           Operations Management ...
+> > > > Select VOLUME SET:
->           Spool Management ...
->           Information Security Officer Menu ...
->           Taskman Management ...
->           User Management ...
->    FM     VA FileMan ...
->           Application Utilities ...
->           Capacity Planning ...
->           HL7 Main Menu ...
->           Manage Mailman ...
->           MAS Parameter Entry/Edit
-> You have PENDING ALERTS
+> > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:
->           Enter  "VA to jump to VIEW ALERTS option
-> Select Systems Manager Menu Option:
+> > > > Select OPTION:
+> > > > GTM>h
-> Do you really want to halt? YES//
-> Logged out at Dec 15, 2008 4:48 pm
+    Reply to author    Forward
-> GTM>%GTM-I-CTRLC, CTRL_C encountered
+Report spam
+Reporting spam
-> GTM>D ^XUP
+Message reported
+    Rate this post: Text for clearing space
-> Setting up programmer environment
+Cancel
-> This is a TEST account.
-> Terminal Type set to: C-VT100
+Send  Discard
-> Select OPTION NAME: DG G&
->      1   DG G&L CHANGES VIEW       View G&L Corrections
+From:
->      2   DG G&L INIT       Gains and Losses Initialization
+ivaldes1@gmail.com <ivaldes1@gmail.com>
->      3   DG G&L RECALC       Recalculate G&L Cumulative Totals
+To:
->      4   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
+Cc:
-> Statistics
+Followup To:
->      5   DG G&L SHEET       Gains and Losses (G&L) Sheet
-> CHOOSE 1-5: 5  DG G&L SHEET     Gains and Losses (G&L) Sheet
+Add Cc | Add Followup-to | Edit Subject
-> Gains and Losses (G&L) Sheet
+Subject:
-> <<<GAINS & LOSSES SHEET/BED STATUS REPORT/TREATING SPECIALTY REPORT>>>
+Validation:
+For [[verification~|Verification]] purposes please type the characters you see in the picture below or the numbers you hear by clicking the accessibility icon. Listen and type the numbers you hear
-> Earliest Date for G&L.....................................NOV 30,2004
+Send  Discard
-> Earliest Date for Treating Specialty Report...............NOT DEFINED
-> Earliest Date to Recalculate..............................NOV 30,2004
-> SSN Format................................................ENTIRE SSN
-> Means Test Copay Applicability............................NOT
-> DISPLAYED
-> Patient's Actual Treating Specialty.......................NOT
-> DISPLAYED
-> Show Non-Movements on G&L.................................SHOW
-> Store Vietnam Vet's Remaining in CENSUS file..............YES
-> Store Patient's over 65 y/o Remaining in
-...
-read more »
-    Reply to author    Forward
@@ Line 615: / Line 583: @@
 I, Valdes
 View profile
-	 More options Dec 15 2008, 6:12 pm
+	 More options Dec 17 2008, 5:24 pm
 From: "I, Valdes" <ival...@hal-pc.org>
-Date: Mon, 15 Dec 2008 15:12:15 -0800 (PST)
+Date: Wed, 17 Dec 2008 14:24:11 -0800 (PST)
-Local: Mon, Dec 15 2008 6:12 pm
+Local: Wed, Dec 17 2008 5:24 pm
-Subject: Re: Intracare Implementation Log Episode 36: Patient movement and tracking? SUMMARY
+Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
-Reply to author | Forward | Print | Individual message | Show original | Remove | Report this message | Find messages by this author
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
-And @ when entering which Ward goes with which bed deletes a Ward from
+The only way I could login and increase the maximum number of users
-a bed. -- IV
+was by using putty.exe into the server and getting to a gtm [[prompt~|Prompt]]
+direct. That was successful. -- IV
-On Dec 15, 5:05 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+On Dec 17, 4:12 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
+wrote:
 - Hide quoted text -
 - Show quoted text -
-> Summary: These are the essential menus for how to define a ward, add
+> Okay, that makes sense. Even if the process terminates *normally* through
-> beds, admit and discharge a patient so it shows where they are via the
+> QUIT, the connection will still be lost.
-> Patient Inquiry report(click on the patient name button in CPRS)  and
-> do the Gains and Losses reports. Biggest trick is you have to enter a
-> G&L number when defining a ward and this is simply a place holder like
-> 5, 10, 15, etc.
-> DG SYSTEM DEFINITION MENU-->Ward Definition Entry/Edit
+> Are you not able to increase the maximum number of users?
-> DG SYSTEM DEFINITION MENU-->Add/Edit Beds
-> DG Admit Patient
-> DG Discharge Patient
-> DG G&     (This gets you the Gains and Losses menu items)
-> Terminal session for various things you need to do to get a G&L report
+> On Wed, Dec 17, 2008 at 2:02 PM, I, Valdes <ival...@hal-pc.org> wrote:
-> going with a daily run. There is a DG G&L Recalc for doing this now.
-> Biggest aha is 1D as a parameter (see below) will get you a daily
-> automatic run. This also shows how to list scheduled tasks so that you
-> can see what is enqueued and finally shows the first report which does
-> not show much.
-> GTM>S DUZ=60 D ^XUP
+> > Thanks Greg, in this case, reviewing the error log revealed nothing as
+> > no error was logged. The system just goes kerplunk and stayed there
+> > without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256.
+> > It has been running for months without problems.
-> Setting up programmer environment
+> > -- IV
-> This is a TEST account.
-> Terminal Type set to: C-VT100
+> > On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
+> > wrote:
+> > > In most cases, this means the peer process (i.e., the one on the MUMPS
+> > side)
+> > > terminated abnormally due to an error, and the connection was lost. You
+> > can
+> > > either review the error log through the menu system or (as is more
+> > common)
+> > > with D ^XTER. This will allow you to see what the error was, what the
+> > > process environment lookeed like (i.e., get a dump of the symbol table)
+> > and
+> > > stack trace. This information can be invaluable in tracking down
+> > problems.
+> > > It may seem overwhelming at first, but an experienced developer can often
+> > > see the problem in minutes or seconds this way. Of course, fixing it may
+> > be
+> > > another matter. :)
-> Select OPTION NAME: DG G
+> >  > On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org> wrote:
->      1   DG G&L CHANGES VIEW       View G&L Corrections
->      2   DG G&L INIT       Gains and Losses Initialization
->      3   DG G&L RECALC       Recalculate G&L Cumulative Totals
->      4   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
-> Statistics
->      5   DG G&L SHEET       Gains and Losses (G&L) Sheet
-> Press <RETURN> to see more, '^' to exit this list, OR
-> CHOOSE 1-5: 4  DG G&L RECALCULATION AUTO     Auto-recalculation of G&L
-> Statistic
-> s
-> Auto-recalculation of G&L Statistics
-> GTM>
-> GTM>D P^DI
+> > > > The CPRS error message for this was Error encountered. Function was:
+> > > > NetCall Error was: M Error - Use ^XTER
-> VA FileMan 22.0
+> > > > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+> > > > > I received the dreaded Maximum number of users already signed on to
-> Select OPTION: ?
+> > > > > this processor problem as well as a Netcall see ^XTER error (not
->     Answer with OPTION NUMBER, or NAME
+> > exact
->    Choose from:
+> > > > > message) This totally hosed my system today for a little while
->    1            ENTER OR EDIT FILE ENTRIES
+> > without
->    2            PRINT FILE ENTRIES
+> > > > > warning. I used the system without a problem then used it again 2
->    3            SEARCH FILE ENTRIES
+> > > > > hours later and received all these problems. My MAX SIGNON ALLOWED
->    4            MODIFY FILE ATTRIBUTES
+> > was
->    5            INQUIRE TO FILE ENTRIES
+> > > > > 256 which apparently wasn't enough. I increased it to 9999 and it
->    6            UTILITY FUNCTIONS
+> > > > > worked. Below is the terminal session for exactly how you increase
->    7            OTHER OPTIONS
+> > > > > this parameter and fix the problem:
->    8            DATA DICTIONARY UTILITIES
->    9            TRANSFER ENTRIES
-> Select OPTION: 5  INQUIRE TO FILE ENTRIES
+> > > > > -- IV
-> OUTPUT FROM WHAT FILE: PATIENT// 19.2  OPTION SCHEDULING
+> > > > > GTM>D P^DI
->                                           (20 entries)
-> Select OPTION SCHEDULING NAME: DG G&L RECALCULATION AUTO       Auto-
-> recalculatio
-> n of G&L Statistics
-> ANOTHER ONE:
-> STANDARD CAPTIONED OUTPUT? Yes//   (Yes)
-> Include COMPUTED fields:  (N/Y/R/B): NO// BOTH Computed Fields and
-> Record Number
->  (IEN)
-> NUMBER: 29                              NAME: DG G&L RECALCULATION
+> > > > > VA FileMan 22.0
-> AUTO
->   QUEUED TO RUN AT WHAT TIME: AUG 21, 2008@21:00
->   TASK ID: 157
->   TASK DEFIND (c): 1
-> Select OPTION SCHEDULING NAME:
+> > > > > Select OPTION: ?
+> > > > >     Answer with OPTION NUMBER, or NAME
+> > > > >    Choose from:
+> > > > >    1            ENTER OR EDIT FILE ENTRIES
+> > > > >    2            PRINT FILE ENTRIES
+> > > > >    3            SEARCH FILE ENTRIES
+> > > > >    4            MODIFY FILE ATTRIBUTES
+> > > > >    5            INQUIRE TO FILE ENTRIES
+> > > > >    6            UTILITY FUNCTIONS
+> > > > >    7            OTHER OPTIONS
+> > > > >    8            DATA DICTIONARY UTILITIES
+> > > > >    9            TRANSFER ENTRIES
-> Select OPTION: E  NTER OR EDIT FILE ENTRIES
+> > > > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES
-> INPUT TO WHAT FILE: OPTION SCHEDULING//
+> > > > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
-> EDIT WHICH FIELD: ALL//
+> > > > >                                           (1 entry)
+> > > > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
+> > > > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
+> > > > > THEN EDIT FIELD:
-> Select OPTION SCHEDULING NAME:    DG G&L RECALCULATION AUTO
+> > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
-> NAME: DG G&L RECALCULATION AUTO//
+> > > > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
-> QUEUED TO RUN AT WHAT TIME: AUG 21,2008@21:00// T@2355  (DEC 15,
+> > > > >    1            VISTA.ICH.LOCAL
-> 2008@23:55)
-> DEVICE FOR QUEUED JOB OUTPUT:
-> OTHER DEVICE PARAMETERS:
-> QUEUED TO RUN ON VOLUME SET:
-> RESCHEDULING FREQUENCY: 1D
-> SPECIAL QUEUEING:
-> Select VARIABLE NAME:
-> USER TO RUN TASK:
-> TASK ID: 245948//
-> TASK PARAMETERS:
-> Select OPTION SCHEDULING NAME:
+> > > > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish
-> Select OPTION:
+> > > > >     Answer with DOMAIN NAME
-> GTM>D ^XUP
+> > > > >    Choose from:
+> > > > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/> <
+> >http://beta.vista-office.org/>
+> > > > >    FORUM.VA.GOV <http://forum.va.gov/> <http://forum.va.gov/>
+> > > > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/> <
+> >http://openforum.worldvista.org/>
+> > > > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/> <
+> >http://platinum.vista-office.org/>
+> > > > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/> <
+> >http://platinum.vista.med.va.gov/>
+> > > > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/> <
+> >http://vamhvweb1.aac.va.gov/>
+> >  > > >    VISTA.ICH.LOCAL
-> Setting up programmer environment
+> > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
-> This is a TEST account.
+> > > > >          ...OK? Yes//   (Yes)
-> Terminal Type set to: C-VT100
+> > > > > Select VOLUME SET: EHR//
+> > > > >   VOLUME SET: EHR//
+> > > > >   MAX SIGNON ALLOWED: 256// 9999
+> > > > >   LOG SYSTEM RT?: NO//
+> > > > > Select VOLUME SET:
-> Select OPTION NAME: EVE
+> > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:
->      1   EVE       Systems Manager Menu
->      2   EVENT CAPTURE (ECS) EXTRACT AU  ECX ECS SOURCE AUDIT
-> Event Capture
-> (ECS) Extract Audit
->      3   EVENT CAPTURE DATA ENTRY  ECENTER     Event Capture Data
-> Entry
->      4   EVENT CAPTURE EXTRACT  ECXEC     Event Capture Extract
->      5   EVENT CAPTURE MANAGEMENT MENU  ECMGR     Event Capture
-> Management Menu
-> Press <RETURN> to see more, '^' to exit this list, OR
-> CHOOSE 1-5: 1  EVE     Systems Manager Menu
->           Core Applications ...
+> > > > > Select OPTION:
->           Device Management ...
+> > > > > GTM>h
->           Menu Management ...
->           Programmer Options ...
->           Operations Management ...
->           Spool Management ...
->           Information Security Officer Menu ...
->           Taskman Management ...
->           User Management ...
->    FM     VA FileMan ...
->           Application Utilities ...
->           Capacity Planning ...
->           HL7 Main Menu ...
->           Manage Mailman ...
->           MAS Parameter Entry/Edit
-> You have PENDING ALERTS
->           Enter  "VA to jump to VIEW ALERTS option
-> Select Systems Manager Menu Option: Taskman Management
+    Reply to author    Forward
+Report spam
+Reporting spam
+Message reported
+    Rate this post: Text for clearing space
+You must Sign in before you can post messages.
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+Greg Woodhouse
+View profile
+	 More options Dec 17 2008, 5:35 pm
+From: "Greg Woodhouse" <gregory.woodho...@gmail.com>
+Date: Wed, 17 Dec 2008 14:35:57 -0800
+Local: Wed, Dec 17 2008 5:35 pm
+Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
->           Schedule/Unschedule Options
+Bear in mind that this is a system administration task. It is to be expected
->           One-time Option Queue
+that adminisrative tasks will require you to log in to the character mode
->           Taskman Management Utilities ...
+interface.
->           List Tasks
->           Dequeue Tasks
->           Requeue Tasks
->           Delete Tasks
->           Print Options that are Scheduled to run
->           Cleanup Task List
->           Print Options Recommended for Queueing
-> You have PENDING ALERTS
+Now, in principle, it is possible to develop a GUI administrative console,
->           Enter  "VA to jump to VIEW ALERTS option
+and this is becoming more and more common. For example, Weblogic and
+Glassfish have them. But VistA does not.
-> Select Taskman Management Option: List Tasks
+- Hide quoted text -
+- Show quoted text -
+On Wed, Dec 17, 2008 at 2:24 PM, I, Valdes <ival...@hal-pc.org> wrote:
->                     List Tasks Option
+> The only way I could login and increase the maximum number of users
+> was by using putty.exe into the server and getting to a gtm [[prompt~|Prompt]]
+> direct. That was successful. -- IV
->                          All your tasks.
+> On Dec 17, 4:12 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
->                          Your future tasks.
+> wrote:
->                          Every task.
+> > Okay, that makes sense. Even if the process terminates *normally* through
->                          List of tasks.
+> > QUIT, the connection will still be lost.
->                          Unsuccessful tasks.
->                          Future tasks.
->                          Running tasks.
->                     Select Type Of Listing: Future tasks.
+> > Are you not able to increase the maximum number of users?
-> Building sorted list of tasks...finished!
+>  > On Wed, Dec 17, 2008 at 2:02 PM, I, Valdes <ival...@hal-pc.org> wrote:
-> DEVICE: HOME//   TELNET
-> Task list  Dec 15, 2008 4:48 pm                                Page 1
-> -------------------------------------------------------------------------------
-> 245948: DG G&L RECALCULATION AUTO - Auto-recalculation of G&L
-> Statistics.
->         No device.  EHR,EHR.  From Today at 16:46,  By you.
->         Scheduled for Today at 23:55
-> Enter RETURN to continue or '^' to exit:
->                     List Tasks Option
+> > > Thanks Greg, in this case, reviewing the error log revealed nothing as
+> > > no error was logged. The system just goes kerplunk and stayed there
+> > > without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256.
+> > > It has been running for months without problems.
->                          All your tasks.
+> > > -- IV
->                          Your future tasks.
->                          Every task.
->                          List of tasks.
->                          Unsuccessful tasks.
->                          Future tasks.
->                          Running tasks.
->                     Select Type Of Listing:
+> > > On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
+> > > wrote:
+> > > > In most cases, this means the peer process (i.e., the one on the
+> MUMPS
+> > > side)
+> > > > terminated abnormally due to an error, and the connection was lost.
+> You
+> > > can
+> > > > either review the error log through the menu system or (as is more
+> > > common)
+> > > > with D ^XTER. This will allow you to see what the error was, what the
+> > > > process environment lookeed like (i.e., get a dump of the symbol
+> table)
+> > > and
+> > > > stack trace. This information can be invaluable in tracking down
+> > > problems.
+> > > > It may seem overwhelming at first, but an experienced developer can
+> often
+> > > > see the problem in minutes or seconds this way. Of course, fixing it
+> may
+> > > be
+> > > > another matter. :)
->           Schedule/Unschedule Options
+> > >  > On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org>
->           One-time Option Queue
+> wrote:
->           Taskman Management Utilities ...
->           List Tasks
->           Dequeue Tasks
->           Requeue Tasks
->           Delete Tasks
->           Print Options that are Scheduled to run
->           Cleanup Task List
->           Print Options Recommended for Queueing
-> You have PENDING ALERTS
+> > > > > The CPRS error message for this was Error encountered. Function
->           Enter  "VA to jump to VIEW ALERTS option
+> was:
+> > > > > NetCall Error was: M Error - Use ^XTER
-> Select Taskman Management Option:
+> > > > > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+> > > > > > I received the dreaded Maximum number of users already signed on
+> to
+> > > > > > this processor problem as well as a Netcall see ^XTER error (not
+> > > exact
+> > > > > > message) This totally hosed my system today for a little while
+> > > without
+> > > > > > warning. I used the system without a problem then used it again 2
+> > > > > > hours later and received all these problems. My MAX SIGNON
+> ALLOWED
+> > > was
+> > > > > > 256 which apparently wasn't enough. I increased it to 9999 and it
+> > > > > > worked. Below is the terminal session for exactly how you
+> increase
+> > > > > > this parameter and fix the problem:
->           Core Applications ...
+> > > > > > -- IV
->           Device Management ...
->           Menu Management ...
->           Programmer Options ...
->           Operations Management ...
->           Spool Management ...
->           Information Security Officer Menu ...
->           Taskman Management ...
->           User Management ...
->    FM     VA FileMan ...
->           Application Utilities ...
->           Capacity Planning ...
->           HL7 Main Menu ...
->           Manage Mailman ...
->           MAS Parameter Entry/Edit
-> You have PENDING ALERTS
+> > > > > > GTM>D P^DI
->           Enter  "VA to jump to VIEW ALERTS option
-> Select Systems Manager Menu Option:
+> > > > > > VA FileMan 22.0
-> Do you really want to halt? YES//
+> > > > > > Select OPTION: ?
+> > > > > >     Answer with OPTION NUMBER, or NAME
+> > > > > >    Choose from:
+> > > > > >    1            ENTER OR EDIT FILE ENTRIES
+> > > > > >    2            PRINT FILE ENTRIES
+> > > > > >    3            SEARCH FILE ENTRIES
+> > > > > >    4            MODIFY FILE ATTRIBUTES
+> > > > > >    5            INQUIRE TO FILE ENTRIES
+> > > > > >    6            UTILITY FUNCTIONS
+> > > > > >    7            OTHER OPTIONS
+> > > > > >    8            DATA DICTIONARY UTILITIES
+> > > > > >    9            TRANSFER ENTRIES
-> Logged out at Dec 15, 2008 4:48 pm
+> > > > > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES
-> GTM>%GTM-I-CTRLC, CTRL_C encountered
-> GTM>D ^XUP
+> > > > > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
+> > > > > >                                           (1 entry)
+> > > > > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
+> > > > > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
+> > > > > > THEN EDIT FIELD:
-> Setting up programmer environment
+> > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
-> This is a TEST account.
+> > > > > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
+> > > > > >    1            VISTA.ICH.LOCAL
-> Terminal Type set to: C-VT100
+> > > > > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish
-> Select OPTION NAME: DG G&
+> > > > > >     Answer with DOMAIN NAME
->      1   DG G&L CHANGES VIEW       View G&L Corrections
+> > > > > >    Choose from:
->      2   DG G&L INIT       Gains and Losses Initialization
+> > > > > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/> <
->      3   DG G&L RECALC       Recalculate G&L Cumulative Totals
+> http://beta.vista-office.org/> <
->      4   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
+> > >http://beta.vista-office.org/>
-> Statistics
+> > > > > >    FORUM.VA.GOV <http://forum.va.gov/> <http://forum.va.gov/> <
->      5   DG G&L SHEET       Gains and Losses (G&L) Sheet
+> http://forum.va.gov/>
-> CHOOSE 1-5: 5  DG G&L SHEET     Gains and Losses (G&L) Sheet
+>  > > > > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/><
-> Gains and Losses (G&L) Sheet
+> http://openforum.worldvista.org/> <
+> > >http://openforum.worldvista.org/>
+> > > > > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/><
+> http://platinum.vista-office.org/> <
+> > >http://platinum.vista-office.org/>
+> > > > > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/><
+> http://platinum.vista.med.va.gov/> <
+> > >http://platinum.vista.med.va.gov/>
+> > > > > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/> <
+> http://vamhvweb1.aac.va.gov/> <
+> > >http://vamhvweb1.aac.va.gov/>
+> > >  > > >    VISTA.ICH.LOCAL
-> <<<GAINS & LOSSES SHEET/BED STATUS REPORT/TREATING SPECIALTY REPORT>>>
+> > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
+> > > > > >          ...OK? Yes//   (Yes)
-> Earliest Date for G&L.....................................NOV 30,2004
+> > > > > > Select VOLUME SET: EHR//
-> Earliest Date for Treating Specialty Report...............NOT DEFINED
+> > > > > >   VOLUME SET: EHR//
-> Earliest Date to Recalculate..............................NOV 30,2004
+> > > > > >   MAX SIGNON ALLOWED: 256// 9999
-> SSN Format................................................ENTIRE SSN
+> > > > > >   LOG SYSTEM RT?: NO//
-> Means Test Copay Applicability............................NOT
+> > > > > > Select VOLUME SET:
-> DISPLAYED
-> Patient's Actual Treating Specialty.......................NOT
-> DISPLAYED
-> Show Non-Movements on G&L.................................SHOW
-> Store Vietnam Vet's Remaining in CENSUS file..............YES
-> Store Patient's over 65 y/o Remaining in CENSUS file......YES
-> PRINT GAINS
+> > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:
-...
+> > > > > > Select OPTION:
+> > > > > > GTM>h
-read more »
      Reply to author    Forward
+Report spam
+Reporting spam
+Message reported
+    Rate this post: Text for clearing space
@@ Line 911: / Line 897: @@
 I, Valdes
 View profile
-	 More options Dec 16 2008, 3:31 pm
+	 More options Dec 17 2008, 5:49 pm
 From: "I, Valdes" <ival...@hal-pc.org>
-Date: Tue, 16 Dec 2008 12:31:30 -0800 (PST)
+Date: Wed, 17 Dec 2008 14:49:10 -0800 (PST)
-Local: Tues, Dec 16 2008 3:31 pm
+Local: Wed, Dec 17 2008 5:49 pm
-Subject: Re: Intracare Implementation Log Episode 36: Patient movement and tracking? SUMMARY
+Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
-Reply to author | Forward | Print | Individual message | Show original | Remove | Report this message | Find messages by this author
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
-DG INPATIENT ROSTER lists patient names by Ward, Patient Name, Room,
+Kevin Toppenberg's GUI-Config is a great start. -- IV
-and Provider
--- IV
-On Dec 15, 5:05 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+On Dec 17, 4:35 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
+wrote:
 - Hide quoted text -
 - Show quoted text -
-> Summary: These are the essential menus for how to define a ward, add
+> Bear in mind that this is a system administration task. It is to be expected
-> beds, admit and discharge a patient so it shows where they are via the
+> that adminisrative tasks will require you to log in to the character mode
-> Patient Inquiry report(click on the patient name button in CPRS)  and
+> interface.
-> do the Gains and Losses reports. Biggest trick is you have to enter a
-> G&L number when defining a ward and this is simply a place holder like
-> 5, 10, 15, etc.
-> DG SYSTEM DEFINITION MENU-->Ward Definition Entry/Edit
+> Now, in principle, it is possible to develop a GUI administrative console,
-> DG SYSTEM DEFINITION MENU-->Add/Edit Beds
+> and this is becoming more and more common. For example, Weblogic and
-> DG Admit Patient
+> Glassfish have them. But VistA does not.
-> DG Discharge Patient
-> DG G&     (This gets you the Gains and Losses menu items)
-> Terminal session for various things you need to do to get a G&L report
+> On Wed, Dec 17, 2008 at 2:24 PM, I, Valdes <ival...@hal-pc.org> wrote:
-> going with a daily run. There is a DG G&L Recalc for doing this now.
-> Biggest aha is 1D as a parameter (see below) will get you a daily
-> automatic run. This also shows how to list scheduled tasks so that you
-> can see what is enqueued and finally shows the first report which does
-> not show much.
-> GTM>S DUZ=60 D ^XUP
+> > The only way I could login and increase the maximum number of users
+> > was by using putty.exe into the server and getting to a gtm [[prompt~|Prompt]]
+> > direct. That was successful. -- IV
-> Setting up programmer environment
+> > On Dec 17, 4:12 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
-> This is a TEST account.
+> > wrote:
+> > > Okay, that makes sense. Even if the process terminates *normally* through
+> > > QUIT, the connection will still be lost.
-> Terminal Type set to: C-VT100
+> > > Are you not able to increase the maximum number of users?
-> Select OPTION NAME: DG G
+> >  > On Wed, Dec 17, 2008 at 2:02 PM, I, Valdes <ival...@hal-pc.org> wrote:
->      1   DG G&L CHANGES VIEW       View G&L Corrections
->      2   DG G&L INIT       Gains and Losses Initialization
->      3   DG G&L RECALC       Recalculate G&L Cumulative Totals
->      4   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
-> Statistics
->      5   DG G&L SHEET       Gains and Losses (G&L) Sheet
-> Press <RETURN> to see more, '^' to exit this list, OR
-> CHOOSE 1-5: 4  DG G&L RECALCULATION AUTO     Auto-recalculation of G&L
-> Statistic
-> s
-> Auto-recalculation of G&L Statistics
-> GTM>
-> GTM>D P^DI
+> > > > Thanks Greg, in this case, reviewing the error log revealed nothing as
+> > > > no error was logged. The system just goes kerplunk and stayed there
+> > > > without warning until I upped the MAX SIGNON ALLOWED to 9999 from 256.
+> > > > It has been running for months without problems.
-> VA FileMan 22.0
+> > > > -- IV
-> Select OPTION: ?
+> > > > On Dec 17, 3:45 pm, "Greg Woodhouse" <gregory.woodho...@gmail.com>
->     Answer with OPTION NUMBER, or NAME
+> > > > wrote:
->    Choose from:
+> > > > > In most cases, this means the peer process (i.e., the one on the
->    1            ENTER OR EDIT FILE ENTRIES
+> > MUMPS
->    2            PRINT FILE ENTRIES
+> > > > side)
->    3            SEARCH FILE ENTRIES
+> > > > > terminated abnormally due to an error, and the connection was lost.
->    4            MODIFY FILE ATTRIBUTES
+> > You
->    5            INQUIRE TO FILE ENTRIES
+> > > > can
->    6            UTILITY FUNCTIONS
+> > > > > either review the error log through the menu system or (as is more
->    7            OTHER OPTIONS
+> > > > common)
->    8            DATA DICTIONARY UTILITIES
+> > > > > with D ^XTER. This will allow you to see what the error was, what the
->    9            TRANSFER ENTRIES
+> > > > > process environment lookeed like (i.e., get a dump of the symbol
+> > table)
+> > > > and
+> > > > > stack trace. This information can be invaluable in tracking down
+> > > > problems.
+> > > > > It may seem overwhelming at first, but an experienced developer can
+> > often
+> > > > > see the problem in minutes or seconds this way. Of course, fixing it
+> > may
+> > > > be
+> > > > > another matter. :)
-> Select OPTION: 5  INQUIRE TO FILE ENTRIES
+> > > >  > On Wed, Dec 17, 2008 at 1:32 PM, I, Valdes <ival...@hal-pc.org>
+> > wrote:
-> OUTPUT FROM WHAT FILE: PATIENT// 19.2  OPTION SCHEDULING
+> > > > > > The CPRS error message for this was Error encountered. Function
->                                           (20 entries)
+> > was:
-> Select OPTION SCHEDULING NAME: DG G&L RECALCULATION AUTO       Auto-
+> > > > > > NetCall Error was: M Error - Use ^XTER
-> recalculatio
-> n of G&L Statistics
-> ANOTHER ONE:
-> STANDARD CAPTIONED OUTPUT? Yes//   (Yes)
-> Include COMPUTED fields:  (N/Y/R/B): NO// BOTH Computed Fields and
-> Record Number
->  (IEN)
-> NUMBER: 29                              NAME: DG G&L RECALCULATION
+> > > > > > On Dec 17, 3:13 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
-> AUTO
+> > > > > > > I received the dreaded Maximum number of users already signed on
->   QUEUED TO RUN AT WHAT TIME: AUG 21, 2008@21:00
+> > to
->   TASK ID: 157
+> > > > > > > this processor problem as well as a Netcall see ^XTER error (not
->   TASK DEFIND (c): 1
+> > > > exact
+> > > > > > > message) This totally hosed my system today for a little while
+> > > > without
+> > > > > > > warning. I used the system without a problem then used it again 2
+> > > > > > > hours later and received all these problems. My MAX SIGNON
+> > ALLOWED
+> > > > was
+> > > > > > > 256 which apparently wasn't enough. I increased it to 9999 and it
+> > > > > > > worked. Below is the terminal session for exactly how you
+> > increase
+> > > > > > > this parameter and fix the problem:
-> Select OPTION SCHEDULING NAME:
+> > > > > > > -- IV
-> Select OPTION: E  NTER OR EDIT FILE ENTRIES
+> > > > > > > GTM>D P^DI
-> INPUT TO WHAT FILE: OPTION SCHEDULING//
+> > > > > > > VA FileMan 22.0
-> EDIT WHICH FIELD: ALL//
-> Select OPTION SCHEDULING NAME:    DG G&L RECALCULATION AUTO
+> > > > > > > Select OPTION: ?
-> NAME: DG G&L RECALCULATION AUTO//
+> > > > > > >     Answer with OPTION NUMBER, or NAME
-> QUEUED TO RUN AT WHAT TIME: AUG 21,2008@21:00// T@2355  (DEC 15,
+> > > > > > >    Choose from:
-> 2008@23:55)
+> > > > > > >    1            ENTER OR EDIT FILE ENTRIES
-> DEVICE FOR QUEUED JOB OUTPUT:
+> > > > > > >    2            PRINT FILE ENTRIES
-> OTHER DEVICE PARAMETERS:
+> > > > > > >    3            SEARCH FILE ENTRIES
-> QUEUED TO RUN ON VOLUME SET:
+> > > > > > >    4            MODIFY FILE ATTRIBUTES
-> RESCHEDULING FREQUENCY: 1D
+> > > > > > >    5            INQUIRE TO FILE ENTRIES
-> SPECIAL QUEUEING:
+> > > > > > >    6            UTILITY FUNCTIONS
-> Select VARIABLE NAME:
+> > > > > > >    7            OTHER OPTIONS
-> USER TO RUN TASK:
+> > > > > > >    8            DATA DICTIONARY UTILITIES
-> TASK ID: 245948//
+> > > > > > >    9            TRANSFER ENTRIES
-> TASK PARAMETERS:
-> Select OPTION SCHEDULING NAME:
+> > > > > > > Select OPTION: 1  ENTER OR EDIT FILE ENTRIES
-> Select OPTION:
+> > > > > > > INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
-> GTM>D ^XUP
+> > > > > > >                                           (1 entry)
+> > > > > > > EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
+> > > > > > >    EDIT WHICH VOLUME SET SUB-FIELD: ALL//
+> > > > > > > THEN EDIT FIELD:
-> Setting up programmer environment
+> > > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
-> This is a TEST account.
+> > > > > > >     Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
+> > > > > > >    1            VISTA.ICH.LOCAL
-> Terminal Type set to: C-VT100
+> > > > > > >         You may enter a new KERNEL SYSTEM PARAMETERS, if you wish
-> Select OPTION NAME: EVE
+> > > > > > >     Answer with DOMAIN NAME
->      1   EVE       Systems Manager Menu
+> > > > > > >    Choose from:
->      2   EVENT CAPTURE (ECS) EXTRACT AU  ECX ECS SOURCE AUDIT
+> > > > > > >    BETA.VISTA-OFFICE.ORG <http://beta.vista-office.org/> <
-> Event Capture
+> >http://beta.vista-office.org/> <
-> (ECS) Extract Audit
+> > > >http://beta.vista-office.org/>
->      3   EVENT CAPTURE DATA ENTRY  ECENTER     Event Capture Data
+> > > > > > >    FORUM.VA.GOV <http://forum.va.gov/> <http://forum.va.gov/> <
-> Entry
+> >http://forum.va.gov/>
->      4   EVENT CAPTURE EXTRACT  ECXEC     Event Capture Extract
+> >  > > > > >    OPENFORUM.WORLDVISTA.ORG <http://openforum.worldvista.org/><
->      5   EVENT CAPTURE MANAGEMENT MENU  ECMGR     Event Capture
+> >http://openforum.worldvista.org/> <
-> Management Menu
+> > > >http://openforum.worldvista.org/>
-> Press <RETURN> to see more, '^' to exit this list, OR
+> > > > > > >    PLATINUM.VISTA-OFFICE.ORG <http://platinum.vista-office.org/><
-> CHOOSE 1-5: 1  EVE     Systems Manager Menu
+> >http://platinum.vista-office.org/> <
+> > > >http://platinum.vista-office.org/>
+> > > > > > >    PLATINUM.VISTA.MED.VA.GOV <http://platinum.vista.med.va.gov/><
+> >http://platinum.vista.med.va.gov/> <
+> > > >http://platinum.vista.med.va.gov/>
+> > > > > > >    VAMHVWEB1.AAC.VA.GOV <http://vamhvweb1.aac.va.gov/> <
+> >http://vamhvweb1.aac.va.gov/> <
+> > > >http://vamhvweb1.aac.va.gov/>
+> > > >  > > >    VISTA.ICH.LOCAL
->           Core Applications ...
+> > > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
->           Device Management ...
+> > > > > > >          ...OK? Yes//   (Yes)
->           Menu Management ...
->           Programmer Options ...
->           Operations Management ...
->           Spool Management ...
->           Information Security Officer Menu ...
->           Taskman Management ...
->           User Management ...
->    FM     VA FileMan ...
->           Application Utilities ...
->           Capacity Planning ...
->           HL7 Main Menu ...
->           Manage Mailman ...
->           MAS Parameter Entry/Edit
-> You have PENDING ALERTS
+> > > > > > > Select VOLUME SET: EHR//
->           Enter  "VA to jump to VIEW ALERTS option
+> > > > > > >   VOLUME SET: EHR//
+> > > > > > >   MAX SIGNON ALLOWED: 256// 9999
+> > > > > > >   LOG SYSTEM RT?: NO//
+> > > > > > > Select VOLUME SET:
-> Select Systems Manager Menu Option: Taskman Management
+> > > > > > > Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:
->           Schedule/Unschedule Options
+> > > > > > > Select OPTION:
->           One-time Option Queue
+> > > > > > > GTM>h
->           Taskman Management Utilities ...
->           List Tasks
->           Dequeue Tasks
->           Requeue Tasks
->           Delete Tasks
->           Print Options that are Scheduled to run
->           Cleanup Task List
->           Print Options Recommended for Queueing
-> You have PENDING ALERTS
->           Enter  "VA to jump to VIEW ALERTS option
-> Select Taskman Management Option: List Tasks
+    Reply to author    Forward
+Report spam
+Reporting spam
+Message reported
+    Rate this post:
+You must Sign in before you can post messages.
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+I, Valdes
+View profile
+	 More options Dec 18 2008, 5:18 pm
+From: "I, Valdes" <ival...@hal-pc.org>
+Date: Thu, 18 Dec 2008 14:18:53 -0800 (PST)
+Local: Thurs, Dec 18 2008 5:18 pm
+Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
+Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
+default to 9999 in the download WorldVistA version? This is a
+particularly nasty problem and is the only one so far that briefly
+rendered the system unusable. Not good when you have a patient waiting
+and the system is giving you this error. -- IV
->                     List Tasks Option
+    Reply to author    Forward
+Report spam
+Reporting spam
+Message reported
+    Rate this post:
+You must Sign in before you can post messages.
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+John McCormack
+View profile
+	 More options Dec 18 2008, 7:26 pm
+From: John McCormack <johnm...@ix.netcom.com>
+Date: Thu, 18 Dec 2008 18:26:02 -0600
+Local: Thurs, Dec 18 2008 7:26 pm
+Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
->                          All your tasks.
+This is treating the symptom. You'll need to find the cause. Did you
->                          Your future tasks.
+perform a system status to see how many and what processes were running
->                          Every task.
+which would cause the previous limit to be reached?
->                          List of tasks.
->                          Unsuccessful tasks.
->                          Future tasks.
->                          Running tasks.
->                     Select Type Of Listing: Future tasks.
+It's kinda of like finding an unconscious patient with shortness of
+breath. You keep giving them more oxygen however until you roll them
+over and find the sucking chest wound the cause is not being treated.
+When you treat the cause then the symptoms will subside. Put another way
+this parameter is your "canary in the coal mine".
-> Building sorted list of tasks...finished!
+I was under the impression that Max Signon would be the number of people on
-> DEVICE: HOME//   TELNET
+the system at once, not a cumulative total which sounds like what is
-> Task list  Dec 15, 2008 4:48 pm                                Page 1
+happening. Maybe some step in the code is not working correctly here?
-> -------------------------------------------------------------------------------
-> 245948: DG G&L RECALCULATION AUTO - Auto-recalculation of G&L
-> Statistics.
->         No device.  EHR,EHR.  From Today at 16:46,  By you.
->         Scheduled for Today at 23:55
-> Enter RETURN to continue or '^' to exit:
->                     List Tasks Option
+On Thursday 18 December 2008, I, Valdes wrote:
->                          All your tasks.
+> Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
->                          Your future tasks.
+> default to 9999 in the download WorldVistA version? This is a
->                          Every task.
+> particularly nasty problem and is the only one so far that briefly
->                          List of tasks.
+> rendered the system unusable. Not good when you have a patient waiting
->                          Unsuccessful tasks.
+> and the system is giving you this error. -- IV
->                          Future tasks.
->                          Running tasks.
->                     Select Type Of Listing:
+--
+Nancy Anthracite
->           Schedule/Unschedule Options
+    Reply to author    Forward
->           One-time Option Queue
+Report spam
->           Taskman Management Utilities ...
+Reporting spam
->           List Tasks
+Message reported
->           Dequeue Tasks
+    Rate this post: Text for clearing space
->           Requeue Tasks
->           Delete Tasks
->           Print Options that are Scheduled to run
->           Cleanup Task List
+You must Sign in before you can post messages.
->           Print Options Recommended for Queueing
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+I, Valdes
+View profile
+	 More options Feb 11, 9:43 pm
+From: "I, Valdes" <ival...@hal-pc.org>
+Date: Wed, 11 Feb 2009 18:43:25 -0800 (PST)
+Local: Wed, Feb 11 2009 9:43 pm
+Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
+Say, is anyone working on this to get it fixed in the main-line
+WorldVistA? -- IV
-> You have PENDING ALERTS
+On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
->           Enter  "VA to jump to VIEW ALERTS option
-> Select Taskman Management Option:
+- Hide quoted text -
+- Show quoted text -
+> Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
+> default to9999in the download WorldVistA version? This is a
+> particularly nasty problem and is the only one so far that briefly
+> rendered the system unusable. Not good when you have a patient waiting
+> and the system is giving you this error. -- IV
->           Core Applications ...
->           Device Management ...
->           Menu Management ...
->           Programmer Options ...
->           Operations Management ...
->           Spool Management ...
->           Information Security Officer Menu ...
->           Taskman Management ...
->           User Management ...
->    FM     VA FileMan ...
->           Application Utilities ...
->           Capacity Planning ...
->           HL7 Main Menu ...
->           Manage Mailman ...
->           MAS Parameter Entry/Edit
-> You have PENDING ALERTS
+    Reply to author    Forward
->           Enter  "VA to jump to VIEW ALERTS option
+Report spam
+Reporting spam
+Message reported
+    Rate this post: Text for clearing space
+You must Sign in before you can post messages.
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+Nancy Anthracite
+View profile
+	 More options Feb 11, 10:01 pm
+From: Nancy Anthracite <nanthrac...@verizon.net>
+Date: Wed, 11 Feb 2009 22:01:48 -0500
+Local: Wed, Feb 11 2009 10:01 pm
+Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
+I have yet to see any evidence that this is a problem due to WorldVistA EHR.
+Do you have more folks signed on than allowed?  If not, did you identify the
+source of the problem?
-> Select Systems Manager Menu Option:
+On Wednesday 11 February 2009, I, Valdes wrote:
-> Do you really want to halt? YES//
+> Say, is anyone working on this to get it fixed in the main-line
+> WorldVistA? -- IV
-> Logged out at Dec 15, 2008 4:48 pm
+> On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
-> GTM>%GTM-I-CTRLC, CTRL_C encountered
+> > Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
+> > default to9999in the download WorldVistA version? This is a
+> > particularly nasty problem and is the only one so far that briefly
+> > rendered the system unusable. Not good when you have a patient waiting
+> > and the system is giving you this error. -- IV
-> GTM>D ^XUP
+--
+Nancy Anthracite
-> Setting up programmer environment
+    Reply to author    Forward
-> This is a TEST account.
+Report spam
+Reporting spam
+Message reported
+    Rate this post: Text for clearing space
+You must Sign in before you can post messages.
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+I, Valdes
+View profile
+	 More options Feb 11, 11:22 pm
+From: "I, Valdes" <ival...@hal-pc.org>
+Date: Wed, 11 Feb 2009 20:22:00 -0800 (PST)
+Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
+There were possibly 3 users on the system at most. If I was qualified
+to diagnose and identify the exact source of the problem I wouldn't be
+asking here. I am not the only one that has reported this problem. I
+am the only one that I know of to publish in detail exactly how you
+slap a band-aid on it. I do wonder what resources WorldVistA is
+bringing to bear to at least investigate this and hopefully fix it and
+put the fix in the main line distribution in a timely manner? I would
+fix it myself it I had the skills, knowledge and experience. I do not
+have those yet.  -- IV
-> Terminal Type set to: C-VT100
+On Feb 11, 9:01 pm, Nancy Anthracite <nanthrac...@verizon.net> wrote:
-> Select OPTION NAME: DG G&
+- Hide quoted text -
->      1   DG G&L CHANGES VIEW       View G&L Corrections
+- Show quoted text -
->      2   DG G&L INIT       Gains and Losses Initialization
+> I have yet to see any evidence that this is a problem due to WorldVistA EHR.
->      3   DG G&L RECALC       Recalculate G&L Cumulative Totals
+> Do you have more folks signed on than allowed?  If not, did you identify the
->      4   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
+> source of the problem?
-> Statistics
->      5   DG G&L SHEET       Gains and Losses (G&L) Sheet
-> CHOOSE 1-5: 5  DG G&L SHEET     Gains and Losses (G&L) Sheet
-> Gains and Losses (G&L) Sheet
-> <<<GAINS & LOSSES SHEET/BED STATUS REPORT/TREATING SPECIALTY REPORT>>>
+> On Wednesday 11 February 2009, I, Valdes wrote:
-> Earliest Date for G&L.....................................NOV 30,2004
+> > Say, is anyone working on this to get it fixed in the main-line
-> Earliest Date for Treating Specialty Report...............NOT DEFINED
+> > WorldVistA? -- IV
-> Earliest Date to Recalculate..............................NOV 30,2004
-> SSN Format................................................ENTIRE SSN
-> Means Test Copay Applicability............................NOT
-> DISPLAYED
-> Patient's Actual Treating Specialty.......................NOT
-> DISPLAYED
-> Show Non-Movements on G&L.................................SHOW
-> Store Vietnam Vet's Remaining in CENSUS file..............YES
-> Store Patient's over 65 y/o Remaining in CENSUS file......YES
-> PRINT
+> > On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+> > > Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
+> > > default to9999in the download WorldVistA version? This is a
+> > > particularly nasty problem and is the only one so far that briefly
+> > > rendered the system unusable. Not good when you have a patient waiting
+> > > and the system is giving you this error. -- IV
-...
+> --
+> Nancy Anthracite
-read more »
      Reply to author    Forward
+Report spam
+Reporting spam
+Message reported
+    Rate this post: Text for clearing space
@@ Line 1,209: / Line 1,279: @@
 Nancy Anthracite
 View profile
-	 More options Dec 16 2008, 3:48 pm
+	 More options Feb 11, 11:48 pm
 From: Nancy Anthracite <nanthrac...@verizon.net>
-Date: Tue, 16 Dec 2008 15:48:26 -0500
+Date: Wed, 11 Feb 2009 23:48:49 -0500
-Local: Tues, Dec 16 2008 3:48 pm
+Local: Wed, Feb 11 2009 11:48 pm
-Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 36: Patient movement and tracking? SUMMARY
+Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
 Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
-Just so people don't get confused about the provider, I believe that the
+Without a way to reproduce the problem, it is a little difficult to fix it.
-provider for that roster will not be the same provider that is listed as the
+My suggestion would have been to get an expert on your system at the time it
-primary care physician when using PCMM for outpatient assignment of a patient
+happened to see if the problem could have been diagnosed.  It could well have
-to a primary care physician and team.
+had nothing to do with VistA at all and the fix that you thought you made for
+the problem may not have really been what really fixed it.
-On Tuesday 16 December 2008, I, Valdes wrote:
+On Wednesday 11 February 2009, I, Valdez wrote:
 - Hide quoted text -
 - Show quoted text -
-> DG INPATIENT ROSTER lists patient names by Ward, Patient Name, Room,
+> There were possibly 3 users on the system at most. If I was qualified
-> and Provider
+> to diagnose and identify the exact source of the problem I wouldn't be
+> asking here. I am not the only one that has reported this problem. I
+> am the only one that I know of to publish in detail exactly how you
+> slap a band-aid on it. I do wonder what resources WorldVistA is
+> bringing to bear to at least investigate this and hopefully fix it and
+> put the fix in the main line distribution in a timely manner? I would
+> fix it myself it I had the skills, knowledge and experience. I do not
+> have those yet.  -- IV
-> -- IV
+> On Feb 11, 9:01 pm, Nancy Anthracite <nanthrac...@verizon.net> wrote:
+> > I have yet to see any evidence that this is a problem due to WorldVistA
+> > EHR.   Do you have more folks signed on than allowed?  If not, did you
+> > identify the source of the problem?
-> On Dec 15, 5:05 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+> > On Wednesday 11 February 2009, I, Valdes wrote:
-> > Summary: These are the essential menus for how to define a ward, add
+> > > Say, is anyone working on this to get it fixed in the main-line
-> > beds, admit and discharge a patient so it shows where they are via the
+> > > WorldVistA? -- IV
-> > Patient Inquiry report(click on the patient name button in CPRS)  and
-> > do the Gains and Losses reports. Biggest trick is you have to enter a
-> > G&L number when defining a ward and this is simply a place holder like
-> > 5, 10, 15, etc.
-> > DG SYSTEM DEFINITION MENU-->Ward Definition Entry/Edit
+> > > On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
-> > DG SYSTEM DEFINITION MENU-->Add/Edit Beds
+> > > > Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
-> > DG Admit Patient
+> > > > default to9999in the download WorldVistA version? This is a
-> > DG Discharge Patient
+> > > > particularly nasty problem and is the only one so far that briefly
-> > DG G&     (This gets you the Gains and Losses menu items)
+> > > > rendered the system unusable. Not good when you have a patient
+> > > > waiting and the system is giving you this error. -- IV
-> > Terminal session for various things you need to do to get a G&L report
+> > --
-> > going with a daily run. There is a DG G&L Recalc for doing this now.
+> > Nancy Anthracite
-> > Biggest aha is 1D as a parameter (see below) will get you a daily
-> > automatic run. This also shows how to list scheduled tasks so that you
-> > can see what is enqueued and finally shows the first report which does
-> > not show much.
-> > GTM>S DUZ=60 D ^XUP
+--
+Nancy Anthracite
-> > Setting up programmer environment
+    Reply to author    Forward
-> > This is a TEST account.
+Report spam
+Reporting spam
+Message reported
+    Rate this post: Text for clearing space
+You must Sign in before you can post messages.
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+Nancy Anthracite
+View profile
+	 More options Feb 12, 12:39 am
+From: Nancy Anthracite <nanthrac...@verizon.net>
+Date: Thu, 12 Feb 2009 00:39:15 -0500
+Local: Thurs, Feb 12 2009 12:39 am
+Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
+MAX SIGNON ALLOWED counts  system, interactive and background processes.  This
+can be found by searching the documentation in the VistA Documentation
+library available online.  256 might be too low depending upon what your
+server is being used for.  9999 might be too high to be helpful in flagging
+that there is a problem with your system.
-> > Terminal Type set to: C-VT100
+Do you think that with your server setup that 256 processes is excessive and
+might signal there is a system problem instead of a VistA problem?  Do you
+think that 9999 is too high?
-> > Select OPTION NAME: DG G
+On Wednesday 11 February 2009, I, Valdes wrote:
-> >      1   DG G&L CHANGES VIEW       View G&L Corrections
-> >      2   DG G&L INIT       Gains and Losses Initialization
-> >      3   DG G&L RECALC       Recalculate G&L Cumulative Totals
-> >      4   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
-> > Statistics
-> >      5   DG G&L SHEET       Gains and Losses (G&L) Sheet
-> > Press <RETURN> to see more, '^' to exit this list, OR
-> > CHOOSE 1-5: 4  DG G&L RECALCULATION AUTO     Auto-recalculation of G&L
-> > Statistic
-> > s
-> > Auto-recalculation of G&L Statistics
-> > GTM>
-> > GTM>D P^DI
+- Hide quoted text -
+- Show quoted text -
+> There were possibly 3 users on the system at most. If I was qualified
+> to diagnose and identify the exact source of the problem I wouldn't be
+> asking here. I am not the only one that has reported this problem. I
+> am the only one that I know of to publish in detail exactly how you
+> slap a band-aid on it. I do wonder what resources WorldVistA is
+> bringing to bear to at least investigate this and hopefully fix it and
+> put the fix in the main line distribution in a timely manner? I would
+> fix it myself it I had the skills, knowledge and experience. I do not
+> have those yet.  -- IV
-> > VA FileMan 22.0
+> On Feb 11, 9:01 pm, Nancy Anthracite <nanthrac...@verizon.net> wrote:
+> > I have yet to see any evidence that this is a problem due to WorldVistA
+> > EHR.   Do you have more folks signed on than allowed?  If not, did you
+> > identify the source of the problem?
-> > Select OPTION: ?
+> > On Wednesday 11 February 2009, I, Valdes wrote:
-> >     Answer with OPTION NUMBER, or NAME
+> > > Say, is anyone working on this to get it fixed in the main-line
-> >    Choose from:
+> > > WorldVistA? -- IV
-> >    1            ENTER OR EDIT FILE ENTRIES
-> >    2            PRINT FILE ENTRIES
-> >    3            SEARCH FILE ENTRIES
-> >    4            MODIFY FILE ATTRIBUTES
-> >    5            INQUIRE TO FILE ENTRIES
-> >    6            UTILITY FUNCTIONS
-> >    7            OTHER OPTIONS
-> >    8            DATA DICTIONARY UTILITIES
-> >    9            TRANSFER ENTRIES
-> > Select OPTION: 5  INQUIRE TO FILE ENTRIES
+> > > On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+> > > > Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
+> > > > default to9999in the download WorldVistA version? This is a
+> > > > particularly nasty problem and is the only one so far that briefly
+> > > > rendered the system unusable. Not good when you have a patient
+> > > > waiting and the system is giving you this error. -- IV
-> > OUTPUT FROM WHAT FILE: PATIENT// 19.2  OPTION SCHEDULING
+> > --
-> >                                           (20 entries)
+> > Nancy Anthracite
-> > Select OPTION SCHEDULING NAME: DG G&L RECALCULATION AUTO       Auto-
-> > recalculatio
-> > n of G&L Statistics
-> > ANOTHER ONE:
-> > STANDARD CAPTIONED OUTPUT? Yes//   (Yes)
-> > Include COMPUTED fields:  (N/Y/R/B): NO// BOTH Computed Fields and
-> > Record Number
-> >  (IEN)
-> > NUMBER: 29                              NAME: DG G&L RECALCULATION
+--
-> > AUTO
+Nancy Anthracite
-> >   QUEUED TO RUN AT WHAT TIME: AUG 21, 2008@21:00
-> >   TASK ID: 157
-> >   TASK DEFIND (c): 1
-> > Select OPTION SCHEDULING NAME:
+    Reply to author    Forward
+Report spam
+Reporting spam
+Message reported
+    Rate this post: Text for clearing space
+You must Sign in before you can post messages.
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+Sanchu Shanmugam
+View profile
+	 More options Feb 12, 1:17 am
+From: Sanchu Shanmugam <sanchu.shanmu...@gmail.com>
+Date: Thu, 12 Feb 2009 11:47:13 +0530
+Local: Thurs, Feb 12 2009 1:17 am
+Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
+The following should help in getting the active vs available jobs
-> > Select OPTION: E  NTER OR EDIT FILE ENTRIES
+. Get all the Active Jobs
-> > INPUT TO WHAT FILE: OPTION SCHEDULING//
+        W $$ACTJ^%ZOSV()
-> > EDIT WHICH FIELD: ALL//
-> > Select OPTION SCHEDULING NAME:    DG G&L RECALCULATION AUTO
+. Get the Available Jobs
-> > NAME: DG G&L RECALCULATION AUTO//
-> > QUEUED TO RUN AT WHAT TIME: AUG 21,2008@21:00// T@2355  (DEC 15,
-> > 2008@23:55)
-> > DEVICE FOR QUEUED JOB OUTPUT:
-> > OTHER DEVICE PARAMETERS:
-> > QUEUED TO RUN ON VOLUME SET:
-> > RESCHEDULING FREQUENCY: 1D
-> > SPECIAL QUEUEING:
-> > Select VARIABLE NAME:
-> > USER TO RUN TASK:
-> > TASK ID: 245948//
-> > TASK PARAMETERS:
-> > Select OPTION SCHEDULING NAME:
+        W $$AVJ^%ZOSV()
-> > Select OPTION:
+You can manage the count based on this result.
-> > GTM>D ^XUP
-> > Setting up programmer environment
+Also, Can you please post the error message you are getting while
-> > This is a TEST account.
+facing the Maximum User problem?.
-> > Terminal Type set to: C-VT100
+You can do ^XTER - D ^XTER, for getting more details.
-> > Select OPTION NAME: EVE
+Regards
-> >      1   EVE       Systems Manager Menu
+Sanchu S
-> >      2   EVENT CAPTURE (ECS) EXTRACT AU  ECX ECS SOURCE AUDIT
-> > Event Capture
-> > (ECS) Extract Audit
-> >      3   EVENT CAPTURE DATA ENTRY  ECENTER     Event Capture Data
-> > Entry
-> >      4   EVENT CAPTURE EXTRACT  ECXEC     Event Capture Extract
-> >      5   EVENT CAPTURE MANAGEMENT MENU  ECMGR     Event Capture
-> > Management Menu
-> > Press <RETURN> to see more, '^' to exit this list, OR
-> > CHOOSE 1-5: 1  EVE     Systems Manager Menu
-> >           Core Applications ...
+On Thu, Feb 12, 2009 at 11:09 AM, Nancy Anthracite
-> >           Device Management ...
-> >           Menu Management ...
-> >           Programmer Options ...
-> >           Operations Management ...
-> >           Spool Management ...
-> >           Information Security Officer Menu ...
-> >           Taskman Management ...
-> >           User Management ...
-> >    FM     VA FileMan ...
-> >           Application Utilities ...
-> >           Capacity Planning ...
-> >           HL7 Main Menu ...
-> >           Manage Mailman ...
-> >           MAS Parameter Entry/Edit
-> > You have PENDING ALERTS
+- Hide quoted text -
-> >           Enter  "VA to jump to VIEW ALERTS option
+- Show quoted text -
+<nanthrac...@verizon.net> wrote:
-> > Select Systems Manager Menu Option: Taskman Management
-> >           Schedule/Unschedule Options
-> >           One-time Option Queue
-> >           Taskman Management Utilities ...
-> >           List Tasks
-> >           Dequeue Tasks
-> >           Requeue Tasks
-> >           Delete Tasks
-> >           Print Options that are Scheduled to run
-> >           Cleanup Task List
-> >           Print Options Recommended for Queueing
-> > You have PENDING ALERTS
-> >           Enter  "VA to jump to VIEW ALERTS option
-> > Select Taskman Management Option: List Tasks
-> >                     List Tasks Option
-> >                          All your tasks.
+> MAX SIGNON ALLOWED counts  system, interactive and background processes.  This
-> >                          Your future tasks.
+> can be found by searching the documentation in the VistA Documentation
-> >                          Every task.
+> library available online.  256 might be too low depending upon what your
-> >                          List of tasks.
+> server is being used for.  9999 might be too high to be helpful in flagging
-> >                          Unsuccessful tasks.
+> that there is a problem with your system.
-> >                          Future tasks.
-> >                          Running tasks.
-> >                     Select Type Of Listing: Future tasks.
+> Do you think that with your server setup that 256 processes is excessive and
+> might signal there is a system problem instead of a VistA problem?  Do you
+> think that 9999 is too high?
-> > Building sorted list of tasks...finished!
+> On Wednesday 11 February 2009, I, Valdes wrote:
-> > DEVICE: HOME//   TELNET
+>> There were possibly 3 users on the system at most. If I was qualified
-> > Task list  Dec 15, 2008 4:48 pm                                Page 1
+>> to diagnose and identify the exact source of the problem I wouldn't be
-> > -------------------------------------------------------------------------
+>> asking here. I am not the only one that has reported this problem. I
-> >------ 245948: DG G&L RECALCULATION AUTO - Auto-recalculation of G&L
+>> am the only one that I know of to publish in detail exactly how you
-> > Statistics.
+>> slap a band-aid on it. I do wonder what resources WorldVistA is
-> >         No device.  EHR,EHR.  From Today at 16:46,  By you.
+>> bringing to bear to at least investigate this and hopefully fix it and
-> >         Scheduled for Today at 23:55
+>> put the fix in the main line distribution in a timely manner? I would
-> > Enter RETURN to continue or '^' to exit:
+>> fix it myself it I had the skills, knowledge and experience. I do not
+>> have those yet.  -- IV
-> >                     List Tasks Option
+>> On Feb 11, 9:01 pm, Nancy Anthracite <nanthrac...@verizon.net> wrote:
+>> > I have yet to see any evidence that this is a problem due to WorldVistA
+>> > EHR.   Do you have more folks signed on than allowed?  If not, did you
+>> > identify the source of the problem?
-> >                          All your tasks.
+>> > On Wednesday 11 February 2009, I, Valdes wrote:
-> >                          Your future tasks.
+>> > > Say, is anyone working on this to get it fixed in the main-line
-> >                          Every task.
+>> > > WorldVistA? -- IV
-> >                          List of tasks.
-> >                          Unsuccessful tasks.
-> >                          Future tasks.
-> >                          Running tasks.
-> >                     Select Type Of Listing:
+>> > > On Dec 18 2008, 4:18 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
+>> > > > Say, can anyone either fix this or set the MAX SIGNON ALLOWED to
+>> > > > default to9999in the download WorldVistA version? This is a
+>> > > > particularly nasty problem and is the only one so far that briefly
+>> > > > rendered the system unusable. Not good when you have a patient
+>> > > > waiting and the system is giving you this error. -- IV
-> >           Schedule/Unschedule Options
+>> > --
-> >           One-time Option Queue
+>> > Nancy Anthracite
-> >           Taskman Management Utilities ...
-> >           List Tasks
-> >           Dequeue Tasks
-> >           Requeue Tasks
-> >           Delete Tasks
-> >           Print Options that are Scheduled to run
-> >           Cleanup Task List
-> >           Print Options Recommended for Queueing
-> > You have PENDING ALERTS
+> --
-> >           Enter  "VA to jump to VIEW ALERTS option
+> Nancy Anthracite
-> > Select Taskman Management Option:
-> >           Core Applications ...
-> >           Device Management ...
-> >           Menu Management ...
-> >           Programmer Options ...
-> >           Operations Management ...
-> >           Spool Management ...
-> >           Information Security Officer Menu ...
-> >           Taskman Management ...
-> >           User Management ...
-> >    FM     VA FileMan ...
-> >           Application Utilities ...
-> >           Capacity Planning ...
-> >           HL7 Main Menu ...
-> >           Manage Mailman ...
-> >           MAS Parameter Entry/Edit
-> > You have PENDING ALERTS
-> >           Enter  "VA to jump to VIEW ALERTS option
-> > Select Systems Manager Menu Option:
-> > Do you really want to halt? YES//
-> > Logged out at Dec 15, 2008 4:48 pm
-> > GTM>%GTM-I-CTRLC, CTRL_C encountered
-> > GTM>D ^XUP
-> > Setting up programmer environment
-> > This is a TEST account.
-> > Terminal Type set to: C-VT100
-> > Select OPTION NAME: DG G&
-> >      1   DG G&L CHANGES VIEW       View G&L Corrections
-> >      2   DG G&L INIT       Gains and Losses Initialization
-> >      3   DG G&L RECALC       Recalculate G&L Cumulative Totals
-> >      4   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
-> > Statistics
-> >      5   DG G&L SHEET       Gains and Losses (G&L) Sheet
-...
-read more »
      Reply to author    Forward
@@ Line 1,497: / Line 1,501: @@
-I, Valdes
+Ignacio Valdes
 View profile
-	 More options Dec 16 2008, 4:34 pm
+	 More options Jul 1, 10:28 am
-From: "I, Valdes" <ival...@hal-pc.org>
+From: Ignacio Valdes <ival...@hal-pc.org>
-Date: Tue, 16 Dec 2008 13:34:32 -0800 (PST)
+Date: Wed, 1 Jul 2009 10:28:08 -0500
-Local: Tues, Dec 16 2008 4:34 pm
+Local: Wed, Jul 1 2009 10:28 am
-Subject: Re: Intracare Implementation Log Episode 36: Patient movement and tracking? SUMMARY
+Subject: Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
-Reply to author | Forward | Print | Individual message | Show original | Remove | Report this message | Find messages by this author
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
-DG BED AVAILABILITY lists available beds. So command summary for most
+I am going to try to fix this problem which has gone on for a long
-bed and patient tracking is:
+time now. This is the only software-caused downtime that I have had in
+the past 10 months.
-DG SYSTEM DEFINITION MENU-->Ward Definition Entry/Edit
+It appears as though for some reason the counter for this is
-DG SYSTEM DEFINITION MENU-->Add/Edit Beds
+inaccurate. It shows a large number of signed on users/processes (like
-DG Admit Patient
+in the 700's) when in reality there is only 8 or so. This may be due
-DG Discharge Patient
+to a missing Taskman process that clears things but I am not sure.
-DG G&     (This gets you the Gains and Losses menu items)
+What program sets the count? Does anyone know if there is a process
-DG BED AVAILABILITY
+that runs and clears this?
-DG INPATIENT ROSTER
 -- IV
-On Dec 15, 5:05 pm, "I, Valdes" <ival...@hal-pc.org> wrote:
 - Hide quoted text -
 - Show quoted text -
-> Summary: These are the essential menus for how to define a ward, add
+On Wed, Dec 17, 2008 at 4:19 PM, Ignacio Valdes<ivald...@gmail.com> wrote:
-> beds, admit and discharge a patient so it shows where they are via the
+> I received the dreaded Maximum number of users already signed on to
-> Patient Inquiry report(click on the patient name button in CPRS)  and
+> this processor problem as well as a Netcall see ^XTER error (not exact
-> do the Gains and Losses reports. Biggest trick is you have to enter a
+> message) This totally hosed my system today for a little while without
-> G&L number when defining a ward and this is simply a place holder like
+> warning. I used the system without a problem then used it again 2
-> 5, 10, 15, etc.
+> hours later and received all these problems. My MAX SIGNON ALLOWED was
+> 256 which apparently wasn't enough. I increased it to 9999 and it
+> worked. Below is the terminal session for exactly how you increase
+> this parameter and fix the problem:
-> DG SYSTEM DEFINITION MENU-->Ward Definition Entry/Edit
+> -- IV
-> DG SYSTEM DEFINITION MENU-->Add/Edit Beds
-> DG Admit Patient
-> DG Discharge Patient
-> DG G&     (This gets you the Gains and Losses menu items)
-> Terminal session for various things you need to do to get a G&L report
-> going with a daily run. There is a DG G&L Recalc for doing this now.
-> Biggest aha is 1D as a parameter (see below) will get you a daily
-> automatic run. This also shows how to list scheduled tasks so that you
-> can see what is enqueued and finally shows the first report which does
-> not show much.
-> GTM>S DUZ=60 D ^XUP
-> Setting up programmer environment
-> This is a TEST account.
-> Terminal Type set to: C-VT100
-> Select OPTION NAME: DG G
->      1   DG G&L CHANGES VIEW       View G&L Corrections
->      2   DG G&L INIT       Gains and Losses Initialization
->      3   DG G&L RECALC       Recalculate G&L Cumulative Totals
->      4   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
-> Statistics
->      5   DG G&L SHEET       Gains and Losses (G&L) Sheet
-> Press <RETURN> to see more, '^' to exit this list, OR
-> CHOOSE 1-5: 4  DG G&L RECALCULATION AUTO     Auto-recalculation of G&L
-> Statistic
-> s
-> Auto-recalculation of G&L Statistics
-> GTM>
 > GTM>D P^DI
@@ Line 1,568: / Line 1,541: @@
 > Select OPTION: ?
->     Answer with OPTION NUMBER, or NAME
+>    Answer with OPTION NUMBER, or NAME
->    Choose from:
+>   Choose from:
->    1            ENTER OR EDIT FILE ENTRIES
+>   1            ENTER OR EDIT FILE ENTRIES
->    2            PRINT FILE ENTRIES
+>   2            PRINT FILE ENTRIES
->    3            SEARCH FILE ENTRIES
+>   3            SEARCH FILE ENTRIES
->    4            MODIFY FILE ATTRIBUTES
+>   4            MODIFY FILE ATTRIBUTES
->    5            INQUIRE TO FILE ENTRIES
+>   5            INQUIRE TO FILE ENTRIES
->    6            UTILITY FUNCTIONS
+>   6            UTILITY FUNCTIONS
->    7            OTHER OPTIONS
+>   7            OTHER OPTIONS
->    8            DATA DICTIONARY UTILITIES
+>   8            DATA DICTIONARY UTILITIES
->    9            TRANSFER ENTRIES
+>   9            TRANSFER ENTRIES
-> Select OPTION: 5  INQUIRE TO FILE ENTRIES
+> Select OPTION: 1  ENTER OR EDIT FILE ENTRIES
-> OUTPUT FROM WHAT FILE: PATIENT// 19.2  OPTION SCHEDULING
+> INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
->                                           (20 entries)
+>                                          (1 entry)
-> Select OPTION SCHEDULING NAME: DG G&L RECALCULATION AUTO       Auto-
+> EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
-> recalculatio
+>   EDIT WHICH VOLUME SET SUB-FIELD: ALL//
-> n of G&L Statistics
+> THEN EDIT FIELD:
-> ANOTHER ONE:
-> STANDARD CAPTIONED OUTPUT? Yes//   (Yes)
-> Include COMPUTED fields:  (N/Y/R/B): NO// BOTH Computed Fields and
-> Record Number
->  (IEN)
-> NUMBER: 29                              NAME: DG G&L RECALCULATION
+> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
-> AUTO
+>    Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
->   QUEUED TO RUN AT WHAT TIME: AUG 21, 2008@21:00
+>   1            VISTA.ICH.LOCAL
->   TASK ID: 157
->   TASK DEFIND (c): 1
-> Select OPTION SCHEDULING NAME:
+>        You may enter a new KERNEL SYSTEM PARAMETERS, if you wish
-> Select OPTION: E  NTER OR EDIT FILE ENTRIES
+>    Answer with DOMAIN NAME
+>   Choose from:
+>   BETA.VISTA-OFFICE.ORG
+>   FORUM.VA.GOV
+>   OPENFORUM.WORLDVISTA.ORG
+>   PLATINUM.VISTA-OFFICE.ORG
+>   PLATINUM.VISTA.MED.VA.GOV
+>   VAMHVWEB1.AAC.VA.GOV
+>   VISTA.ICH.LOCAL
-> INPUT TO WHAT FILE: OPTION SCHEDULING//
+> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
-> EDIT WHICH FIELD: ALL//
+>         ...OK? Yes//   (Yes)
-> Select OPTION SCHEDULING NAME:    DG G&L RECALCULATION AUTO
+> Select VOLUME SET: EHR//
-> NAME: DG G&L RECALCULATION AUTO//
+>  VOLUME SET: EHR//
-> QUEUED TO RUN AT WHAT TIME: AUG 21,2008@21:00// T@2355  (DEC 15,
+>  MAX SIGNON ALLOWED: 256// 9999
-> 2008@23:55)
+>  LOG SYSTEM RT?: NO//
-> DEVICE FOR QUEUED JOB OUTPUT:
+> Select VOLUME SET:
-> OTHER DEVICE PARAMETERS:
-> QUEUED TO RUN ON VOLUME SET:
-> RESCHEDULING FREQUENCY: 1D
-> SPECIAL QUEUEING:
-> Select VARIABLE NAME:
-> USER TO RUN TASK:
-> TASK ID: 245948//
-> TASK PARAMETERS:
-> Select OPTION SCHEDULING NAME:
+> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:
 > Select OPTION:
-> GTM>D ^XUP
+> GTM>h
-> Setting up programmer environment
-> This is a TEST account.
-> Terminal Type set to: C-VT100
+    Reply to author    Forward
+Report spam
+Reporting spam
+Message reported
+    Rate this post: Text for clearing space
+You must Sign in before you can post messages.
+To post a message you must first join this group.
+Please update your nickname on the subscription settings page before posting.
+You do not have the permission required to post.
+Sam Habiel
+View profile
+	 More options Jul 4, 11:35 am
+From: Sam Habiel <sam.hab...@gmail.com>
+Date: Sat, 4 Jul 2009 09:35:39 -0700
+Local: Sat, Jul 4 2009 11:35 am
+Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
+Try D ^ZSY to show you processes. I hope it's installed on your
+system. Otherwise, you can get it from Medsphere's integration
+project.
-> Select OPTION NAME: EVE
+Sam
->      1   EVE       Systems Manager Menu
->      2   EVENT CAPTURE (ECS) EXTRACT AU  ECX ECS SOURCE AUDIT
-> Event Capture
-> (ECS) Extract Audit
->      3   EVENT CAPTURE DATA ENTRY  ECENTER     Event Capture Data
-> Entry
->      4   EVENT CAPTURE EXTRACT  ECXEC     Event Capture Extract
->      5   EVENT CAPTURE MANAGEMENT MENU  ECMGR     Event Capture
-> Management Menu
-> Press <RETURN> to see more, '^' to exit this list, OR
-> CHOOSE 1-5: 1  EVE     Systems Manager Menu
->           Core Applications ...
+- Hide quoted text -
->           Device Management ...
+- Show quoted text -
->           Menu Management ...
+On Wed, Jul 1, 2009 at 8:28 AM, Ignacio Valdes<ival...@hal-pc.org> wrote:
->           Programmer Options ...
->           Operations Management ...
->           Spool Management ...
->           Information Security Officer Menu ...
->           Taskman Management ...
->           User Management ...
->    FM     VA FileMan ...
->           Application Utilities ...
->           Capacity Planning ...
->           HL7 Main Menu ...
->           Manage Mailman ...
->           MAS Parameter Entry/Edit
-> You have PENDING ALERTS
+> I am going to try to fix this problem which has gone on for a long
->           Enter  "VA to jump to VIEW ALERTS option
+> time now. This is the only software-caused downtime that I have had in
+> the past 10 months.
-> Select Systems Manager Menu Option: Taskman Management
+> It appears as though for some reason the counter for this is
+> inaccurate. It shows a large number of signed on users/processes (like
+> in the 700's) when in reality there is only 8 or so. This may be due
+> to a missing Taskman process that clears things but I am not sure.
+> What program sets the count? Does anyone know if there is a process
+> that runs and clears this?
->           Schedule/Unschedule Options
+> -- IV
->           One-time Option Queue
->           Taskman Management Utilities ...
->           List Tasks
->           Dequeue Tasks
->           Requeue Tasks
->           Delete Tasks
->           Print Options that are Scheduled to run
->           Cleanup Task List
->           Print Options Recommended for Queueing
-> You have PENDING ALERTS
+> On Wed, Dec 17, 2008 at 4:19 PM, Ignacio Valdes<ivald...@gmail.com> wrote:
->           Enter  "VA to jump to VIEW ALERTS option
+>> I received the dreaded Maximum number of users already signed on to
+>> this processor problem as well as a Netcall see ^XTER error (not exact
+>> message) This totally hosed my system today for a little while without
+>> warning. I used the system without a problem then used it again 2
+>> hours later and received all these problems. My MAX SIGNON ALLOWED was
+>> 256 which apparently wasn't enough. I increased it to 9999 and it
+>> worked. Below is the terminal session for exactly how you increase
+>> this parameter and fix the problem:
-> Select Taskman Management Option: List Tasks
+>> -- IV
->                     List Tasks Option
+>> GTM>D P^DI
->                          All your tasks.
+>> VA FileMan 22.0
->                          Your future tasks.
->                          Every task.
->                          List of tasks.
->                          Unsuccessful tasks.
->                          Future tasks.
->                          Running tasks.
->                     Select Type Of Listing: Future tasks.
+>> Select OPTION: ?
+>>    Answer with OPTION NUMBER, or NAME
+>>   Choose from:
+>>   1            ENTER OR EDIT FILE ENTRIES
+>>   2            PRINT FILE ENTRIES
+>>   3            SEARCH FILE ENTRIES
+>>   4            MODIFY FILE ATTRIBUTES
+>>   5            INQUIRE TO FILE ENTRIES
+>>   6            UTILITY FUNCTIONS
+>>   7            OTHER OPTIONS
+>>   8            DATA DICTIONARY UTILITIES
+>>   9            TRANSFER ENTRIES
-> Building sorted list of tasks...finished!
+>> Select OPTION: 1  ENTER OR EDIT FILE ENTRIES
-> DEVICE: HOME//   TELNET
-> Task list  Dec 15, 2008 4:48 pm                                Page 1
-> -------------------------------------------------------------------------------
-> 245948: DG G&L RECALCULATION AUTO - Auto-recalculation of G&L
-> Statistics.
->         No device.  EHR,EHR.  From Today at 16:46,  By you.
->         Scheduled for Today at 23:55
-> Enter RETURN to continue or '^' to exit:
->                     List Tasks Option
+>> INPUT TO WHAT FILE: OPTION SCHEDULING// KERNEL SYSTEM PARAMETERS
+>>                                          (1 entry)
+>> EDIT WHICH FIELD: ALL// VOLUME SET    (multiple)
+>>   EDIT WHICH VOLUME SET SUB-FIELD: ALL//
+>> THEN EDIT FIELD:
->                          All your tasks.
+>> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: ?
->                          Your future tasks.
+>>    Answer with KERNEL SYSTEM PARAMETERS NUMBER, or DOMAIN NAME:
->                          Every task.
+>>   1            VISTA.ICH.LOCAL
->                          List of tasks.
->                          Unsuccessful tasks.
->                          Future tasks.
->                          Running tasks.
->                     Select Type Of Listing:
+>>        You may enter a new KERNEL SYSTEM PARAMETERS, if you wish
->           Schedule/Unschedule Options
+>>    Answer with DOMAIN NAME
->           One-time Option Queue
+>>   Choose from:
->           Taskman Management Utilities ...
+>>   BETA.VISTA-OFFICE.ORG
->           List Tasks
+>>   FORUM.VA.GOV
->           Dequeue Tasks
+>>   OPENFORUM.WORLDVISTA.ORG
->           Requeue Tasks
+>>   PLATINUM.VISTA-OFFICE.ORG
->           Delete Tasks
+>>   PLATINUM.VISTA.MED.VA.GOV
->           Print Options that are Scheduled to run
+>>   VAMHVWEB1.AAC.VA.GOV
->           Cleanup Task List
+>>   VISTA.ICH.LOCAL
->           Print Options Recommended for Queueing
-> You have PENDING ALERTS
+>> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME: VISTA.ICH.LOCAL
->           Enter  "VA to jump to VIEW ALERTS option
+>>         ...OK? Yes//   (Yes)
-> Select Taskman Management Option:
+>> Select VOLUME SET: EHR//
+>>  VOLUME SET: EHR//
+>>  MAX SIGNON ALLOWED: 256// 9999
+>>  LOG SYSTEM RT?: NO//
+>> Select VOLUME SET:
->           Core Applications ...
+>> Select KERNEL SYSTEM PARAMETERS DOMAIN NAME:
->           Device Management ...
->           Menu Management ...
->           Programmer Options ...
->           Operations Management ...
->           Spool Management ...
->           Information Security Officer Menu ...
->           Taskman Management ...
->           User Management ...
->    FM     VA FileMan ...
->           Application Utilities ...
->           Capacity Planning ...
->           HL7 Main Menu ...
->           Manage Mailman ...
->           MAS Parameter Entry/Edit
-> You have PENDING ALERTS
+>> Select OPTION:
->           Enter  "VA to jump to VIEW ALERTS option
+>> GTM>h
-> Select Systems Manager Menu Option:
-> Do you really want to halt? YES//
+    Reply to author    Forward
+Report spam
-> Logged out at Dec 15, 2008 4:48 pm
+Reporting spam
-> GTM>%GTM-I-CTRLC, CTRL_C encountered
+Message reported
+    Rate this post: Text for clearing space
-> GTM>D ^XUP
-> Setting up programmer environment
-> This is a TEST account.
-> Terminal Type set to: C-VT100
-> Select OPTION NAME: DG G&
->      1   DG G&L CHANGES VIEW       View G&L Corrections
->      2   DG G&L INIT       Gains and Losses Initialization
->      3   DG G&L RECALC       Recalculate G&L Cumulative Totals
->      4   DG G&L RECALCULATION AUTO       Auto-recalculation of G&L
-> Statistics
->      5   DG G&L SHEET       Gains and Losses (G&L) Sheet
-> CHOOSE 1-5: 5  DG G&L SHEET     Gains and Losses (G&L) Sheet
-> Gains and Losses (G&L) Sheet
-> <<<GAINS & LOSSES SHEET/BED STATUS REPORT/TREATING SPECIALTY REPORT>>>
-> Earliest Date for G&L.....................................NOV 30,2004
-> Earliest Date for Treating Specialty Report...............NOT DEFINED
-> Earliest Date to Recalculate..............................NOV 30,2004
-> SSN Format................................................ENTIRE SSN
-> Means Test Copay Applicability............................NOT
-> DISPLAYED
-> Patient's Actual
-...
-read more »
-    Reply to author    Forward
@@ Line 1,797: / Line 1,719: @@
-I, Valdes
+Bhaskar, KS
 View profile
-	 More options Dec 17 2008, 5:54 pm
+	 More options Jul 4, 2:05 pm
-From: "I, Valdes" <ival...@hal-pc.org>
+From: "Bhaskar, KS" <KS.Bhas...@fnis.com>
-Date: Wed, 17 Dec 2008 14:54:01 -0800 (PST)
+Date: Sat, 4 Jul 2009 14:05:55 -0500
-Local: Wed, Dec 17 2008 5:54 pm
+Local: Sat, Jul 4 2009 2:05 pm
-Subject: Re: Intracare Implementation Log Episode 36: Patient movement and tracking? SUMMARY
+Subject: Re: [Hardhats] Re: Intracare Implementation Log Episode 37: Maximum number of users already signed on to this processor
-Reply to author | Forward | Print | Individual message | Show original | Remove | Report this message | Find messages by this author
+Reply to author | Forward | Print | Individual message | Show original | Report this message | Find messages by this author
-Say, DG INPATIENT ROSTER prints at 132 columns which is painful on
-screen even if you have the display maximized on a 17 inch display and
+If you know the global variable that counts number of users, mupip journal extract on that variable from the journal files may be informative.
-set to 132 in putty.exe. It still wraps around the last 5 or so
-characters rendering it dreadful. I don't particularly need the ID or
+Regards
-Means Test fields. Is there a way to compact the screen display
+-- Bhaskar
+</pre>