Setting up a VISTA Printer
Back to Programming VistA Issues
Contents
This is an updated page. See this page for old content.
Setting up a printer in VISTA
In order to set-up a printer in VISTA, there are three steps:
- Add printer to CUPS
- In VISTA, you need to create an entry that represents the printer formatting characteristics in the terminal type file (#3.2)
- Then you need to create an entry in the device file (#3.5) that corresponds to the printer
In practice, you don't need to do the second step because there are only about 5 commonly used subtypes in VISTA which you reuse.
A Subtype is a file entry that contains what code to send to the printer in order to open the printer, reset the printer, select the page size, adjust the margins, select the font etc.
The most common subtypes are listed here.
Cache/Linux printing
You can use Pipes in Cache to print on Linux/Unix. Here's an operative example. Based on my experience, this is the best way to do it.
NAME: SAM'S PHARMACY PRINTER $I: /usr/bin/lpr -PSAN_FL6 -l OPEN PARAMETERS: "QW" SUBTYPE: P-HPLJ4SI-P12 TYPE: TERMINAL
Please note that there is a bug in DEVOK^%ZOSV (ZOSVONT) that prevents it from checking the device properly. This will show up if you misconfigure a device and then use it in Taskman. Short of fixing this, here is how to remove the bad prints from Taskman:
S (DEV,ZTIME,ZTSK)="" F S DEV=$O(^%ZTSCH("IO",DEV)) Q:DEV="" F S ZTIME=$O(^%ZTSCH("IO",DEV,ZTIME)) Q:'ZTIME F S ZTSK=$O(^%ZTSCH("IO",DEV,ZTIME,ZTSK)) Q:'ZTSK D DQ^%ZTLOAD
You can also use the method developed but not adopted by the VA in patch XU*8.0*585. After attempting to use this method in production, I would recommend against it, because a. CPRS and BCMA code is not configured to pick up PQ devices and b. %ZISC has issues with PQ devices. I have fixed both of these issues; but the code for this is not in VISTA yet.
Here's a sample device that uses the XU*8.0*585 method:
NAME: PRINTER_NAME $I: PRINTER_NAME PURGE OLD PRINT QUEUE FILES: YES LOCATION OF TERMINAL: Cups Device SUBTYPE: P-HP-LTR-POR-C17L7-W128-NOFF TYPE: PRINT QUEUE
GT.M/Linux printing
Pipes again; just like Cache.
NAME: PHAR-IP-DM $I: PHAR-IP-DM LOCATION OF TERMINAL: Inpatient Pharmacy Dot-Matrix OPEN PARAMETERS: (shell="/bin/sh":comm="lpr -l -P PHAR-IP-DM 2>/dev/null":WRITEONLY)::"pipe" SUBTYPE: P-EPSON-DM-P15-5L TYPE: TERMINAL NAME: PHAR-IP-LS $I: PHAR-IP LOCATION OF TERMINAL: Inpatient Pharmacy Landscape OPEN PARAMETERS: (shell="/bin/sh":comm="lpr -P PHAR-IP -l":WRITEONLY)::"pipe" SUBTYPE: P-HPLJ4SI-P13-LS TYPE: TERMINAL NAME: PHAR-IP-POR-P12 $I: PHAR-IP LOCATION OF TERMINAL: Inpatient Pharmacy Portrait (PL) OPEN PARAMETERS: (shell="/bin/sh":comm="lpr -P PHAR-IP -l":WRITEONLY)::"pipe" MNEMONIC: PL SUBTYPE: P-HPLJ4SI-P12 TYPE: TERMINAL NAME: PHAR-IP-POR-P16 $I: PHAR-IP LOCATION OF TERMINAL: Inpatient Pharmacy Portrait (MAR) OPEN PARAMETERS: (shell="/bin/sh":comm="lpr -P PHAR-IP -l":WRITEONLY)::"pipe" MNEMONIC: MAR SUBTYPE: P-HPLJ2-P16 TYPE: TERMINAL
How does this work? The way this works is that $I becomes the IO variable. The open parameters tells VISTA how to open the device.
Vista does this:
S IO=[$I] S param=[OPEN PARAMETERS] O IO:param U IO Send Open Execute from Subtype U IO(0) Interact with user; open another job, etc... U IO write write write Send Close Execute from Subtype C IO etc.
No need to do pre-open and post-close executes on the device which dynamically change IOs.
Avoiding the Staircase effect when printing from GT.M/Cache on *Nix
For an explanation of the Staircase effect, see this: http://www.digitalissues.co.uk/html/os/unix/stair.html
Basically, the new line doesn't do a carriage return with it, so our output just flows off the page. So when you print a 10 line document, you may only see one line, as the rest was printed outside of the margin.
If you are sending raw output (lpr with the -l option) from VISTA to any PCL compatible printer (and VISTA by and large uses PCL for formatting plain text output), you need to add this to your open execute:
W $C(27),"&k2G"
This tells the PCL compatible printer to append a CR to each LF or FF.
On the other hand, if you are asking cups to handle the formatting (lpr without the -l option), cups properly formats the line returns through a cups filter, so you don't have to do anything.
